M.Kawabata, T.Sasaki, K.Wada, S.Kanemaru, Y.Nomura, H.Sasahara,
Welding torch with coaxial wire feed and rotating electrode for wire-arc directed energy deposition,
Additive Manufacturing, 84 (2024) 104106.
Toshiaki Otsuki, Hiroyuki Sasahara,
Block processing time-based programming for high-speed, high-precision 5-axis machining,
Precision Engineering, 88 (2024), 497-515.
I.Radchenko, W.Takahashi, H.Takahashi, T.Abe, H.Sasahara,
Introduction of internal circulation-based cooling methods and green coolants in milling via cutting tool and tooling design,
Applied Science, 14, 1379 (2024.02).
Y.Ochi, M.Usui, H.Sasahara,
Influence of Reverse Finishing on Characteristics of Drilling Surface,
International Journal of Automation Technology, 18, 3 (May 2024) 332-341.
I. Radchenko, W. Takahashi, H. Takahashi, and H. Sasahara,
Internal coolant circulation-based tool design to reduce the temperature and heat spreading when turning SUS304 Stainless Steel,
Journal of Journal of Advanced Mechanical Design, Systems and Manufacturing, 18,4 (2024) paper No.23-00383.
M.Kawabata, T.Sasaki, K.Wada, S.Kanemaru, Y.Nomura and H.Sasahara,
Effect of arc length on deposition characteristics in rotary TIG torch,
Journal of Journal of Advanced Mechanical Design, Systems and Manufacturing, 18,4 (2024) paper No.23-00552.
?q??????C???q?C????K?j?C?????`??C?????O?V?C
?~???^?_?C???d??????u?????CFRP???a?????H?C
?u?????H?w???C?f?????.
K.Nakajima, H.Sasahara, H.Nagamatsu, T.Abe,
ERTi-2 cladding layer formation on a 5052 plate by a weaving strategy with wire and arc additive manufacturing,
The International Journal of Advanced Manufacturing Technology, ?f?????.
#M.Makino, K.Utsumi, and H.Sasahara,
Effect of Tool Posture on Chatter Vibration in Turn-milling,
Precision Engineering, 79, (January 2023), pp. 335-348.
M.Nomura, S.Kurashige, Y.Ito, Y.Fukuhara, H.Sasahara,
Development of Electrodeposited Wire Mesh Grinding Wheel for Cutoff and Grooving Carbon Fiber Reinforced Plastic,
Materials, (2023), 16(15), 5247.
Ilia Radchenko, Wataru Takahashi, Hidebumi Takahashi, Hiroyuki Sasahara,
Effects of Internal Coolant Circulation-based Cooling Schemes on Tool Wear in Turning SUS304 Stainless Steel,
The International Journal of Advanced Manufacturing Technology, 129(Oct. 2023) pp.3141?3154 .
H.Nagamatsu, T.Abe, K.Nakajima, H.Sasahara,
Development of directed energy deposition strategy for mechanically interlocked Ti-Al component with cross-shaped internal Ti lattice,
Additive Manufacturing, Volume 78, 25 (September 2023), 103895,
T.Otsuki, K.Okita, H.Sasahara,
Evaluating surface quality by luminance and surface roughness,
Precision Engineering, 74 (March 2022) 147-162.
H.Nagamatsu, H.Sasahara,
Improvement of Cooling Effect and Dimensional Accuracy of Wire and Arc Additive Manufactured Magnesium Alloy by Active-Cooling-Based Contacting Copper Blocks,
Journal of Manufacturing and Materials Processing, 6, 2 (2022) 27.
Y.Ito, Y.Kita, Y.Fukuhara, M.Nomura, H.Sasahara,
Development of In-Process Temperature Measurement of Grinding Surface with an Infrared Thermometer,
Journal of Manufacturing and Materials Processing, 6, 2 (2022) 44.
Y.Kamada, A.Kitakaze, K.Sannomiya, T.Nakaya, H.Sasahara,
Mechanism to suppress regenerative chatter vibration due to the effect of air-cutting and multiple regeneration during low frequency vibration cutting, Precision Engineering,
Precision Engineering, 78 (November 2022) 1-18.
Junjie He, R.Yokota, Y.Imamiya, K.Noriyama, H.Sasahara,
Investigation of the Microstructure of Ti6Al4V Alloy by Coaxial Double Laser Metal-Wire Deposition,
Materials, 15(22) (November 2022) 7985.
H.Nagamatsu, T.Abe, H.Sasahara,
Microstructure Evaluation of the Potential of Additive Manufactured Dissimilar Titanium?Aluminum alloys, Materials,
Materials, 15(24) (December 2022) 9038.
M.Makino, K.Utsumi, and H.Sasahara,
Effect of Tool Posture on Chatter Vibration in Turn-milling,
Precision Engineering, 79 (January 2023) 335-348.
T.Abe, H.Sasahara,
Simulating the build shape for a shell structure for wire and arc additive manufacturing using the bead cross-section model,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 15, 1 (January 2021) Paper No.20-00422.
Mohamed O. Helmy, Hassan El-Hofy, Hiroyuki Sasahara, M. H. El-Hofy,
Rake angle effects on ultrasonic-assisted edge trimming of multidirectional CFRP laminates, The International,
Journal of Advanced Manufacturing Technology, 115 (June 2021) 3467?3484.
Nur Syuhada Nasir, Norfariza Ab Wahab, Badri Bin Sofian, Raja Izamshah, Hiroyuki Sasahara,
Experimental Investigations Towards Hole Accuracy in Micro-drilling of Carbon Fibre Reinforced Polymer,
Material, Manufacturing Technology, 21, 3 (June 2021) 381-386.
K.Wickramasinghe, H.Sasahara, M.Usui,
Performance evaluation of a sustainable metal working fluid applied to machine Inconel 718 and AISI 304 with minimum quantity lubrication,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 15, 4 (July 2021).
K.Wickramasinghe, H.Sasahara, E.A. Rahim, G.I P Perera,
Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based Metalworking Fluids,
Journal of Cleaner Production, 310, 10 (August 2021) 127459.
M. Amirul Adli, N. Ab Wahab, M. Harezul Abd Razak, M. Ridzuan Azizzi, Mohd Hadzley Abu Bakar, H. Sasahara,
Micro-Influence of Vacuum Block Positions on Machinability of Acrylic Using Hybrid Vacuum Clamping System,
International Journal of Nanoelectronics and Materials, Vol 14 (Special Issue) (August 2021) pp.145-158.
Y.Kamada, H.Sasahara,
Residual stress fluctuates periodically via the workpiece rotation phase during low frequency vibration cutting,
Precision Engineering, 72, (November 2021) 583-594.
R.Miyake, H.Sasahara, A.Suzuki, S.Ouchi,
Wire Arc Additive and High-Temperature Subtractive Manufacturing of Ti-6Al-4V,
Applied Science, 11, 20 (2021) 9521.
K.C Wickramasinghe, H.Sasahara, E.A.Rahim, G.I.P.Perera,
Green Metalworking Fluids for sustainable machining applications: A review,
Journal of Cleaner Production, 257 (June 2020).
H.Nagamatsu, H.Sasahara, Y.Mitsutake, T.Hamamoto,
Development a cooperative system for wire and arc additive manufacturing and machining,
Additive manufacturing, 31 (January 2020).
K.Utsumi, S.Shichiri, H.Sasahara,
Determining the effect of tool posture on cutting force in a turn milling process using an analytical prediction model,
International Journal of Machine Tools and Manufacture, Vol. 150 (March 2020) 103511.
T.Abe, J.Kaneko, H.Sasahara,
Thermal sensing and heat input control for thin-walled structure building based on numerical simulation for wire and arc additive manufacturing,
Additive Manufacturing, Volume 35 (October 2020) 101357.
?O???m?C?k?????q?C?N???q?C?????????C????????C?O?{??F?C???J????C???c?z?C?????O?V,
????g?U??????n????????H??`??????錤??,
???{?@?B?w???_???W?CVol.86, No.892 (2020) p.20-00323.
T.Otsuki, H.Sasahara, R.Sato,
Method to evaluate speed and accuracy performance of CNC machine tools by speed-error 2-D representation,
Journal of Advanced Mechanical Design, Systems, and Manufacturing (2019) Vol.13, No.1.
A.S.A.Sani, E.A.Rahim, S.Sharif, H.Sasahara,
The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045,
Tribology International, 129 (January 2019), pp.347-362.
T.Otsuki, H.Sasahara, R.Sato,
Method for Generating CNC Programs Based on Block-Processing Time to Improve Speed and Accuracy of Machining Curved Shapes,
Precision Engineering, 55(2019) pp.33-41.
T.Abe, D.Mori, K.Sonoya, N.Masanobu, H.Sasahara,
Control of the Chemical Composition Distribution in Deposited Metal by Wire and Arc-based Additive manufacturing,
Precision Engineering, 55(2019) pp.231-239.
H.Takagi, H.Sasahara, T.Abe, H.Sannomiya, S.Nishiyama, S.Ohta, K.Nakamura,
Material-property evaluation of magnesium alloys fabricated using wire-and-arc-based additive manufacturing,
Additive Manufacturing, available on line.
A.S.A.Sani, E.A.Rahim, S.Sharif, H.Sasahara,
Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique,
Cleaner Production, 209 (2019) 947-964.
K.Suzuki, R.Koyasu, Y.Takeda, H.Sasahara,
Application of a Novel Woven Metal Wire Tool with Electrodeposited Diamond Grains for Carbon Fiber Reinforced Plastics Core Drilling,
Precision Engineering, in press.
K.C Wickramasinghe, G.I.P. Perera, Himan KG Punchihewa and H.Sasahara,
Surface Quality Evaluation of 0.2% C and AISI 304 Steels in Turning with Sustainable lubricating Condition,
Journal of Mechanical Science and Technology, 33, 12 (2019) pp.5753~5759.
S.Toyokawa, N.Nakatsuka, A.Kusakabe, H.Sasahara,
Surface Characteristic on Curved Grinding of Titanium Alloy with Coolant Supplying from Inner Side of Grinding Wheel,
Key Engineering Materials, 825 (October 2019), pp 84-91.
N.Nakatsuka, S.Toyokawa, A.Kusakabe, S.Nakatsukasa, H.Sasahara,
Effect of the Type of Grinding Wheel on the Surface Characteristic of Titanium Alloy with Internal Coolant Supply,
Key Engineering Materials, 825 (October 2019), pp 92-98.
T.Tsurumaki, H.Chibahara, S.Tsukamoto, H.Sasahara,
Precise additive fabrication of wall structure on thin plate end with interlayer temperature monitoring,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 13, 2 (April 2019) Paper No.19-00070
????????C?y?????C?L???l?C?????O?V?C
???a?u?????R?[?i???????????????u?Γ??t???????p????????錤???C
?u?????H?w???C63, 10 (2019) p. 528-533.
Y.Takada, H.Sasahara,
Effect of Tip Shape of Frictional Stir Burnishing Tool on Processed Layer?fs Hardness,
Residual Stress and Surface Roughness, Coatings, 8, 1 (2018) 32.
H.Sasahara, Y.Sukegawa, Y.Yamada,
CFRP machining capability by a circular saw,
Precision Engineering, 52 (2018) 291-299.
?????`??C???C???C?????O?V?C
?u?Ε\???????I????x??????????????H??????????C???v???Z?X????C
?u?????H?w???C62, 4 (2018) pp.204-210.
A.Miyake, H.Sasahara, A.Kitakaze, S.Katoh, M.Muramatsu, K.Noguchi, K.Sannomiya, T.Nakaya,
Chip Control in Turning with Synchronization of Spindle Rotation and Feed Motion Vibration,
Precision Engineering, 53 (2018) pp.38-45.
H. Sasahara, K. Satake, W. Takahashi, M. Goto and H. Yamamoto,
The Effect of Oil Mist Supply on Cutting Point Temperature and Tool Wear on Driven Rotary Cutting,
recision Engineering, 48 (2017) 158-163.
N. Talib, H. Sasahara, E. A. Rahim,
Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process,
The International Journal of Advanced Manufacturing Technology, 92 (2017) pp. 371-391
E. A. Rahim, H. Sasahara,
Performance of palm oil as a biobased machining lubricant when drilling inconel 718,
MATEC Web of Conferences, vol. 101 (2017)
T. Otsuki, H. Sasahara, R. Sato,
A method for the evaluation and magnified representation of two-dimensional contouring error,
Precision Engineering, 50 (2017) pp. 433-439.
K. Okamura, H. Sasahara,
Prediction of drilling temperature during low-frequency vibration drilling of titanium alloy,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 11, 3 (2017) Paper No.16-00431,
E. A. Rahim, H. Sasahara,
Three Dimensional Finite Element Modeling when Drilling of Ti-6Al-4V,
International Journal of Robotics and Mechatronics, Vol. 4, No. 1 (2017) pp.33-38
Y. Fukuhara, S. Suzuki, H.Sasahara,
Real-time Grinding State Discrimination Strategy by Use of Monitor-embedded Grinding Wheels,
Precision Engineering, Vol.51 (2018) pp.128-136.
Kai Xu and H. Sasahara,
Generation of Uniformly Aligned Dimples on a Curved Surface Using a Curved-Surface Patch-Division Milling Technique,
Int. J. of Automation Technology, 10, 1(2016-01) pp.23-29.
T. Abe and H. Sasahara,
Dissimilar metal deposition with stainless steel and nickel based alloy by wire and arc based additive manufacturing,
Precision Engineering, 45 (2016) pp.387-395. doi:10.1016/j.precisioneng.2016.03.016
???????u?C?????O?V,
????g?U???????????????@?\???C
?u?????H?w???C60, 6 (2016-06) pp.320-325.
T. Nakamura, H. Sasahara, S. Kusunose and I. Nishizaki,
Identification of Aluminum Alloy Flow Stress to Determine FEM Analysis Constitutive Equation for Machining Material,
Materials Science Forum, Vol. 874, pp.457-462, doi:10.4028/www.scientific.net/MSF.874.457
H. Sasahara, K. Satake, W. Takahashi, M. Goto and H. Yamamoto,
The Effect of Oil Mist Supply on Cutting Point Temperature and Tool Wear on Driven Rotary Cutting,
Precision Engineering, 48 (2017) pp.158-163. doi:10.1016/j.precisioneng.2016.11.016
Takeyuki Abe and Hiroyuki Sasahara,
Development of the Shell Structures Fabrication CAM System for Direct Metal Lamination Using Arc Discharge -Lamination Height Error Compensation by Torch Feed Speed Control-,
International Journal of Precision Engineering and Manufacturing, 16, 1 (2015-01) pp.171-176?D
???C?K???C?????C????ˉp???C?????f???C?????O?V?C
??????H???????тт?U???}???p???z?U????v???@?????錤???C
?????H?w???C81?C2(2015) pp.187-192?D
Norfariza Wahab, Hiroyuki Sasahara,
Identification of Friction Characteristics and Flow Stress of 0.45% Carbon Steel during Cutting Process,
Advanced Materials Research, 1101 (2015-04) pp.402-405. 10.4028/www.scientific.net/AMR.1101.402
Norfariza Wahab, Hiroyuki Sasahara, Shinnosuke Baba, Yuta Hiratsuka, Takashi Nakamura,
Development of High-speed Shearing Method to Obtain the Flow Stress under High Strain Rate,
International Journal of Modeling and Optimization, 5, 2, April (2015-04), pp.140-144. DOI 10.7763/IJMO.2015.V5.450.
Masato Goto, Wataru Takahashi, Wataru Sasaki, Takeshi Toujyo, Yuji Takagi Hiromasa Yamamoto and Hiroyuki Sasahara,
Effect of cutting conditions on tool wear in driven rotary cutting of maraging steel,
Key Engineering Materials Vols 656-657 (2015-07) pp.208-213. doi:10.4028/www.scientific.net/KEM.656-657.208
Hisataka Takagi, Takeyuki Abe, Peng Cui and Hiroyuki Sasahara,
Mechanical Properties Evaluation of Metal Components Repaired by Direct Metal Lamination,
Key Engineering Materials Vols 656-657 (2015) pp.440-445. doi:10.4028/www.scientific.net/KEM.656-657.44
K. Nomura, N. Takeuchi, A. Kusakabe, M. Chino and H. Sasahara,
Improvement of surface roughness with micro-axial vibration of spindle by pressure pulsation of
grinding fluid supplied through inside of wheel, Advances Materials Research, 806 (2015) pp.673-677.
Y. Fukuhara, S. Suzuki and H. Sasahara,
Development of in-process monitoring system for grinding wheel surface temperature and grinding state,
Advances Materials Research, 806 (2015) pp.624-629.
???c???`?C?????O?V?C
??d?点??o?H?????C???a?`?o?j?V???O???鍂?d?x?E???k?c????????????\??????w??n???C
???{?@?B?w??_???W?C81?C830 (2015) No.15-00350 [DOI:10.1299/transjsme.15-00350].(???????J9??25??)
Norfariza Wahab, Yumi Inatsugu, Satoshi Kubota, Soo Young Kim, Hiroyuki Sasahara,
An Integral Method to Determine Workpiece Flow Stress and Friction Characteristics in Metal Cutting,
International Journal of Automation Technology, 9, 6 (2015-11) pp.775-781.
Yohei Yamada and Hiroyuki Sasahara,
Free-form curves cutting using flexible circular saw, Precision
Engineering, 38, 3 (2014) pp.611-616. DOI: 10.1016/j.precisioneng.2014.02.011
Hiroyuki Sasahara, Tomoko Kikuma,
Rei Koyasu, Yasuhiro Yao, Surface grinding of carbon ?ber reinforced plastic
(CFRP) with an internal coolant supplied through grinding wheel, Precision Engineering, 38, 4 (2014) pp.775-782.
DOI: 10.1016/j.precisioneng.2014.04.005
Wataru Takahashi, Hiroyuki Sasahara , Hiromasa Yamamoto, Yuji
Takagi, FEM simulation on the effect of cutting parameters in the driven rotary
cutting, Key Engineering Materials, 625 (2015) pp.564-569. doi:10.4028/www.scientific.net/KEM.625.564
Norfariza Wahab, Yumi Inatsugu, Satoshi Kubota, Soo Young Kim, Hiroyuki Sasahara,
Identification of Flow Stress Applicable for FEM Simulation of Orthogonal Cutting Process,
Key Engineering Materials, 625 (2014-08) pp.378-383. doi:10.4028/www.scientific.net/KEM.625.378
Nagatoshi Nakatsuka, Yudai Hirai, Atushi Kusakabe, Yasuhiro Yao and Hiroyuki Sasahara,
Effect of coolant supplied through grinding wheel on residual stress of grinding surface,
Advanced Materials Research, 1017 (2014-09) pp.33-37. doi:10.4028/www.scientific.net/AMR. 1017.33
Kosaku Matsubara, Jun Tsuchimura, Shota Kawazoe and Hiroyuki Sasahara,
Form accuracy of internal grinding of small and deep holes with coolant supplied from inner side of grinding wheel,
Advanced Materials Research, 1017 (2014-09) pp.50-54. doi:10.4028/www.scientific.net/AMR.1017.50
??????O?C???u?C???]?c??C?????O?V?C
???u???d???u????????u?Γ?????t?????@?\?????C
?u?????H?w???C57,4 (2013) pp.229-234.
?c???h?O?C?????s?u?C?g??扢?C?????O?V?C
?A?[?N???d??p?????n?Z??????w???鑢?`??????x?C
???{?@?B?w???_???W?iC??j?C79,800 (2013) pp.1168-1178.
Takeshi Yashiro, Takayuki Ogawa and Hiroyuki Sasahara,
Temperature measurement of cutting tool and machined surface layer in milling of CFRP,
International Journal of Machine Tools and Manufacture, 70 ,7 (2013) pp.63-69. http://dx.doi.org/10.1016/j.ijmachtools.2013.03.009
Kai Xu and Hiroyuki Sasahara,
Generation of Regularly Aligned Dimples on Triangular Pyramidal Patches Using
Patch Division Milling, Int. J. of Automation Technology,7, 6 (2013) pp.751-759.
?????l?C?????s?u?C???C???C?????O?V?C
?A?[?N???d??p?????n?Z??????w????n?Z?r???p???@?????w???????e???C
???{?@?B?w???_???W?iC??j?C78, 785(2012) 282-291.
Kan Ding, Hiroyuki Sasahara,
Study on the Machining of Iron-Based Thermal Spray Coating for Sleeveless Engine Cylinder,
Advanced Materials Research, Vols.472-475 (2012) pp. 991-996.
?????O?V?C????q?C??c?q?F?C?x?i?[??C
?Y?f?|S45C?????C???a?`?o?j?V???O???H????d???g?D??n???C
???{?@?B?w???_???W?iC??j?C78, 787 (2012) pp. 996-1003.
?????O?V?C?c???h?O?C?g??扢?C
?n?Z??????w??????鑢?`????????x?E?????g?D?????錤???C
?????H?w???C 78, 5 (2012) 415-419.
?c???h?O?C?????O?V?C
?v???X???^???????g?????n?^???????@??????|(NC ?}?V??????n?Z??????w???w??????J???C
???{?@?B?w???_???W?iC??j?C78, 790 (2012) 2340-2349.
??????O?C???u?C???]?c??C?????O?V?C
?u?Γ?????t???????????錤??t??????????????C
?????H?w???C78, 8 (2012) pp.710-715?D
Takeyuki Abe and Hiroyuki Sasahara,
Residual Stress and Deformation after Finishing of a Shell Structure Fabricated by Direct Metal Lamination Using Arc Discharge,
Int. J. of Automation Technology?C6, 5 (2012) pp. 611-617?D
Yohei Yamada, Nobuyuki Osumi, Akio Takasugi, Hiroyuki Sasahara,
Curved Line Cutting Using Flexible Circular Saw,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 6, 6 (2012) pp.971-978.
E. A. Rahim, Z. Mohid, K. C. Mat, M. F. M. Jamil, R. Koyasu, and H. Sasahara,
Hole Making Process of Carbon Fiber Reinforced Polymer (CFRP) Using End Mill Cutting Tool,
Advanced Materials Research,576 (2012) pp. 64-67.
E. A. Rahim, Z. Mohid, M. F. M. Jamil, K. C. Mat, R. Koyasu and H. Sasahara,
Experimental Study of Helical Milling on CFRP (Carbon Fibre Reinforced Polymer) for the Hole Making Process,
Advanced Materials Research,576 (2012) pp. 68-71.
Kai Xu and Hiroyuki Sasahara,
Generation of Regularly Aligned Curved Surface Patches on Free-form Surface for Patch Division Milling,
Key Engineering Materials, Vols. 523-524 (2012) pp.54-57.
Zhi Li, Yasuhiro Yao, Keigo Nakae and Hiroyuki Sasahara,
Temperature Measurement of Surface Grinding Using a Fluid Supplying System from Inside of Grinding Wheel,
Key Engineering Materials, Vols. 523-524 (2012) pp.125-130.
Erween Abd. Rahim, Hiroyuki Sasahara,
Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil,
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
September 2011; vol. 225, 9: pp. 1505-1511.
??????O?C?s?j?m???C?????O?V?C
?u?Γ?????t?????@?\???????`?????H?????錤???C
???{?@?B?w???_???W?iC??j?C77, 781(2011) 3522-3531?D
?R?{????C???|?????Y?C?????O?V?C???c?O?C?琳?b?C????r?V?C
???^???[?^??????????????\?????H???????MQL?????|?H???x???肭??????|?C
?????H?w???C77, 3, (2011) pp.316-321.
Erween Abd. Rahim, Hiroyuki Sasahara,
An Analysis of Surface Integrity when Drilling Inconel 718 using Palm Oil and Synthetic Ester under MQL Condition.
Machining Science and Technology, 15, 1, (2011) pp.76 ? 90.
Erween Abd. Rahim, Hiroyuki Sasahara,
A Study of the Effect of Palm oil as MQL Lubricant on High Speed Drilling of Titanium Alloys,
Tribology International, accepted, published online.
Erween Abd. Rahim, Hiroyuki Sasahara,
A Study of the Effect of Palm oil as MQL Lubricant on High Speed Drilling of Titanium Alloys,
Tribology International, accepted, published online.
Toshihito Kamioka, Syuhei Ishikawa and Hiroyuki Sasahara,
Fabrication of Elbow Pipe by Direct Metal Lamination Using Arc Discharge while Maintaining the Molten Pool in a Horizontal Position,
Int. J. of Automation Technology, 4, 5 (2010) pp.422-431.
Satoshi Kiuchi and Hiroyuki Sasahara,
Temperature History and Metallographic Structure of 0.45%C Steel Processed by Frictional Stir Burnishing,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4, 5 (2010) pp.838-.848.
Kan Ding, Hiroyuki Sasahara, Syuji Adachi and Kimio Nishimura,
Investigation on the Cutting Process of Plasma Sprayed Iron Base Alloys,
Key Engineering Materials, 447-448 (2010) pp. 821-825.
Erween Abd. Rahim, Hiroyuki Sasahara,
Effect of Machining Parameters and MQL Liquids on Surface Integrity of High Speed Drilling Ti-6Al-4V,
Key Engineering Materials, 447-448 (2010) pp. 816-820.
Erween Abd. Rahim, Hiroyuki Sasahara,
Surface Integrity in MQL Drilling Nickel-Based Superalloy,
Key Engineering Materials, 447-448 (2010) pp. 811-815.
Hiromasa Yamamoto, Kentaro Satake, Hiroyuki Sasahara, Toru Narita, Masaomi Tsutsumi, Toshiyuki Muraki,
Thermal Behavior and Tool Failures on Rotary Cutting of Difficult-to-cut Materials Utilizing Multi Tasking Lathe,
Key Engineering Materials, 447-448 (2010) pp. 806-810.
Erween Abd. Rahim, Hiroyuki Sasahara,
Surface Integrity when Drilling Nickel-Based Superalloy under MQL Supply,
Key Engineering Materials, 443 (2010) pp. 365-370.
Erween Abd. Rahim, Hiroyuki Sasahara,
Effect of MQL Liquids on Surface Integrity when High Speed Drilling Titanium Alloy,
Key Engineering Materials, 443 (2010) pp. 359-364.
???c?????C?????O?V?C???c??C?琳?b?F
?p?b?`???????@????C??O?p?`?p?b?`?????K???I?\???l?`???C
?????H?w??, 76, 1 (2010) pp.111-115.
????????CK.M.Muditha Dassanayake?C??\?????C?????O?V?F
????J????G???h?~?????????????H???x??\???????C
???{?@?B?w???_???W?iC??j?C75, 757 (2009) pp.2475-2482.
?????O?V?C????N?j?C?????l?C?c???h?O?C?g??扢?F
?n?Z??????w????X?Ε????`?\??w?`???y????????q?????e???\?C
???{?@?B?w???_???W?iC??j?C75, 757 (2009) pp.2435-2439.
???????C?????[?C?????O?V?F
?V?[?P???V?????????????M?I????c???????????I?\???C
???{?@?B?w???_???W?iC??j?C75, 757 (2009) pp.2404-2409.
Toshiyuki Obikawa, Yoshifumi Takemura, Yasuhiro Akiyama, Jun Shinozuka, Hiroyuki Sasahara,
Microscopic Phase-Dependent Residual Stresses in the Machined Surface Layer of Two-Phase Alloy:
FE Modeling and Results,
Journal of Materials Processing Technology,
209, 9 (2009) pp. 4496-4501.
Kei Harada, Hiroyuki Sasahara,
Effect of Dynamic Response and Displacement/Stress Amplitude
on Ultrasonic Vibration Cutting,
Journal of Materials Processing Technology, 209, 9 (2009)
pp.4490-4495.
Erween Abd. Rahim, Hiroyuki Sasahara,
Application of Minimum Quantity Lubrication when
Drilling Nickel-Based Superalloy at High Cutting Speed, Key Engineering Materials, 407-408
(2009) pp.612-615.
Hiroyuki Sasahara, Yoshihisa Naito,
Prediction and Avoidance of Chatter in Milling of
Thin-walled Structure,
Key Engineering Materials, 407-408 (2009) pp.404-407.
Hiroyuki Sasahara, Makoto Kawasaki, Masaomi Tsutsumi,
Helical Feed Milling with MQL for Boring of Aluminum Alloy,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 6 (2008) pp.1030-1040.
Ryuji Iwashita, Hiroyuki Sasahara,
Study on Simulation of Micro Cutting Process of Alternatively Arranged Resin and Metal,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 4 (2008) pp.711-718.
Hiroshi Nakajima, Atsushi Kato, Hiroyuki Sasahara, Hiromasa Yamamoto, Toshiyuki Muraki, Masaomi Tsutsumi,
Effect of Rotary Cutting Tool Posture on Multi Tasking Lathe,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 4 (2008) pp.532-539.
Hiroshi Matsuda, Hiroyuki Sasahara, Masaaki Fukuda and Masaomi Tsutsumi,
Tool Path Generation for the Formation of a Geometric Surface Pattern on a Curved Surface by Patch Division Milling,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 4 (2008) pp.504-512.
YuLong Tang, Kan Ding, Hiroyuki Sasahara, Kimio Nishimura, Takafumi Watanabe,
Clarification of the Amount of Machining Error Resulting from the Cutting Force and the Thermal Expansion during Cylinder Liner Boring Process,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 3 (2008) pp.332-342.
YuLong Tang and Hiroyuki Sasahara,
Analytical Prediction of Temperature Distribution in Cylinder Liner during Various Boring Operations,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 3 (2008) pp.278-289.
Hiroyuki Sasahara, Atsushi Kato, Hiroshi Nakajima, Hiromasa Yamamoto, Toshiyuki Muraki, Masaomi Tsutsumi,
High-speed Rotary Cutting of Difficult-to-Cut Materials on Multi-Tasking Lathe,
International Journal of Machine Tools and Manufacture, 48, 7-8 (2008) pp.841-850.
Hiroshi Matsuda, Hiroyuki Sasahara, Masaomi Tsutsumi,
Generation of a Regularly Aligned Surface Pattern and Control of Cutter marks Array by Patch Division Milling,
International Journal of Machine Tools and Manufacture, 48, 1 (2008) pp.84-94.
Tang Yu Long and Hiroyuki Sasahara,
Investigation of thermal behavior on cylinder liner during its boring process,
International Journal of Machine Tools and Manufacture, 47, 14 (2007) pp.2162-2171.
?????O?V?C?????????C?????v?F
?p??????d?????d??????茊???H?C
???{?@?B?w???_???W?iC??j?C73, 733 (2007) pp.2619-2624.
???c??C?????O?V?C?琳?b?F
?d?グ??????l??z???y??????i???????????厲???x??????e???C
?????H?w???C73, 3 (2007) pp.355-359.
???c??C?????O?V?C???V???C?琳?b?F
?p?b?`???????@???镽????K???I?\???l?`???C
?????H?w??, 72, 9 (2006) pp.1123-1127.
?????O?V?C?????F
??????]????G???h?~???????M?`?B?????錤???C
?????H?w??, 72, 9 (2006) pp.1103-1107.
?????O?V?C???V??F
????????????????H????w??J????????e???C
???{?@?B?w???_???W?iC??j?C72, 720 (2006) pp.2634-2640.
Yuji Furukawa, Hiroyuki Sasahara, Akira Kakuta, Kenichiro Chuma,
Principal Factors Affecting the Sub-Micrometer Grooving Mechanism of SiC Thin Layers by a 355 nm UV Laser,
Annals CIRP, 55, 1 (2006) pp.573-576.
?????O?V?C??????C?c???M???C?l?????F
?j?A?h???C???H????????~?X?g?E????????????l?C
?????H?w???C72, 8 (2006) pp.983-987.
????r???C?????O?V?C???B?Y?C?????????C?琳?b?F
???|?o?j?V???O???????H?H???J????????{?????@?|?G???h?~???^?C?v???????H?H????????H?\??????k?c??????????|?C
?????H?w???C72, 7 (2006), pp.909-913.
?????O?V?C?????ˋv?C?琳?b?F
CAD/CAE????????p?????G???h?~?????H????тт?U????\???????C
?????H?w???C72, 4 (2006), pp.534-538.
Kiyoshi Okamura, Hiroyuki. Sasahara, Toshiaki Segawa, Masaomi Tsutsumi,
Low-frequency Vibration Drilling of Titanium Alloy,
JSME International Journal, Series C, 49, 1(2006) pp.76-82.
Hiroyuki Sasahara, Masahisa Chino, Masaomi Tsutsumi,
Development of a Layered Manufacturing System Using Sheet Metal-Polymer Lamination for Mechanical Parts,
International Journal of Advanced Manufacturing Technology, 27, 3-4 (2005) pp.268-273.
???c?\?C?????O?V?F
?????g?U?????????????@?\?????錤??(??3??)?|???H????C???鏁??????ω??|?C
?????H?w???C71, 8 (2005) pp.1005-1009.
????r???C?????O?V?C???J?[?C?V???s??C?琳?b?F
?A???~?j?E????????h???C?????H????????肭???r?o????????? -??肭???r?o?????y????????p??e??-?C
?????H?w???C71, 5 (2005) pp.623-627.
????r???C?????O?V?C???B?Y?C?????????C?琳?b?F
???k?c??????????H???????H?\???c?????????C
?????H?w???C71, 4 (2005) pp.496-500.
?????v?C?????O?V?C?y????C???C?琳?b?F
?????|?????q??w???鑢?`???u??J????}?V?j???O?Z???^??????C
???{?@?B?w???_???W?iC??j?C71?C702 (2005) pp.713-718.
Hiroyuki Sasahara,
The Effect on Fatigue Life of Residual Stress and Surface Hardness resulting from Different Cutting Conditions of 0.45%C Steel,
International Journal of Machine Tools and Manufacture, 45, 2 (2005) pp. 131-136.
?{?c?l??C?????O?V?F
?L???v?f?@??????V?~?????[?^??J?? ?|GUI??J????H??`???e????????|?C
?????H?w???C71, 1 (2005) pp.115-119.
Toshiaki Segawa, Hiroyuki Sasahara, Masaomi Tsutsumi,
Development of a New Tool to Generate Compressive Residual Stress within a Machined Surface,
International Journal of Machine Tools and Manufacture, 44, 11 (2004) pp.1215-1221.
?????O?V?C???c?\?F
?????g?U?????????????@?\?????錤??(??2??)?|???I?????????ψ?U???E????U????e???|?C
?????H?w???C70, 9 (2004) pp.1191-1195.
?????O?V?C???j?g?C?_??F?C?????v?F
?U??????????????U??????H????C??e???|50Hz?U????????|,
???{?@?B?w???_???W?iC??j?C70, 694 (2004) pp.1843-1848.
?????O?V?C?????????C??S??Y?F
??J??????y???????d?グ????c???????d????e??,
?????H?w???C70, 6 (2004) pp.872-874.
????r???C?????O?V?C???B?Y?C?琳?b?F
???k?c??????????H???J????????{????,
?????H?w???C70, 6 (2004) pp.853-857.
Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi,
Prediction Model of Surface Residual Stress within a Machined Surface by Combining Two Orthogonal Plane Models,
International Journal of Machine Tools and Manufacture, 44, 7-8 (2004) pp. 815-822.
Hiroyuki Sasahara, Masaomi Tsutsumi,
Strategic Optimization of Cutting Conditions by Model-Based Analysis with the Aid of Database Utilization,
Trans. NAMRI/SME, Vol.32,?@(2004) pp. 581-588.
?????O?V?C???c?\?F
?????g?U?????????????@?\?????錤??(??1??)?|???????x???????肭???????????V?~?????[?V???????|,
?????H?w???C70, 4 (2004) pp.578-582.
?????O?V?C????????C?琳?b?F
???I??@??f?[?^?x?[?X????p??????????I??V?X?e???C
?????H?w???C69, 12 (2003) pp.1749-1753.
?????O?V?C??落?C?琳?b?F
MQL??K?p?????w???J??????~?????O????A???~?j?E????????????H,
???{?@?B?w???_???W(C??)?C69,684 (2003) pp.2156-2161.
?????O?V?F
???I???????L???v?f?@???C
?????H?w???C69,8 (2003) pp.1124- 1128.
?????O?V?C?c?????q?C?_??F?C?????v?F
?V?F?[?r???O???H????????????????????FEM???,
???{?@?B?w???_???W(C??)?C67,654 (2001) pp.541-546.
?????O?V?C???J?????C?琳?b?F
?I?C???~?X?g???????鍂???G???h?~?????H????H??????e??,
?????H?w???C66,1 (2000) pp.80-84.
?????O?V?C????V?F
?????????L???v?f?@?V?~?????[?V?????C
?????H?w???C64, 7 (1998) pp.1083-1087.
Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi, Eiji Usui,
Application of Computational Machining Method to Discontinuous Chip Formation,
Trans. ASME. J. Manuf. Sci. Eng., 119 (1997) pp.667-674.
Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi,
Finite Element Modeling of Residual Stress Control on Machined Surface,
Trans. NAMRI/SME, Vol. XXV, (1997), pp.213-218.
Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi,
FEM Analysis of Cutting Sequence Effect on Mechanical Characteristics in Machined Layer,
J. Materials Processing Tech., 62, (1996) pp.448-453.
?????O?V?C????V?C???~???m?F
???H????????H????w?????????C
?????H?w???C61, 10 (1995) pp.1453-1457.
?????O?V?C????V?C???~???m?F
?????H????w?????????V?~?????[?V???????i??R??j?C
?????H?w???C60, 12 (1994) pp.1801-1805.
Takahiro Shirakashi, Hiroyuki Sasahara, Toshiyuki Obikawa and Takeshi Wada,
The Analytical Prediction of Residual Stress within Machined Sublayer and Its Effect on Accuracy,
Int.J.JSPE?C28, 3 (1994) pp.200-205.
Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi,
The Prediction of Effects of Cutting Condition on Mechanical Characteristics in Machined Layer?C
Advancement of Intelligent Production, Edit. E.Usui, Elsevier, (1994) pp.473-478.
Hiroyuki SASAHARA, Toshiyuki Obikawa, Takahiro Shirakashi,
FEM Analysis on Three Dimensional Cutting -Analysis on Large Deformation Problem of Tool Entry-,
Int. J. JSPE?C28, 2 (1994) pp.123-128.
?????O?V?C????V?C???~???m?C?P??p???F
????тт?U????????铮?I??????????`????i??S??j?C
?????H?w???C60, 4 (1994) pp.565-569.
???~???m?C????V?C?????O?V?C?a?c???i?F
?????H????w?????????V?~?????[?V???????i??Q??j?C
?????H?w???C59, 12 (1993) pp.2003-2008.
???~???m?C????V?C?????O?V?C?a?c???i?F
?????H????w?????????V?~?????[?V???????i??P??j?C
?????H?w???C59, 10 (1993) pp.1695-1700.
?????O?V?C????V?C???~???m?F
?O????????L???v?f?@?V?~?????[?V?????C
?????H?w???C59?C8 (1993) pp.1275-1280.
????V?C?????O?V?C???~???m?C?P??p???F
????тт?U????????铮?I??????????`????i??R??j?C
?????H?w???C59?C7 (1993) pp.1151-1156.
????V?C?c?????V?C?????O?V?C???~???m?C?P??p???F
????f?^??肭????????L???v?f?@?V?~?????[?V?????C
?????H?w???C59?C5 (1993) pp.821-826.
????V?C?????O?V?C?P??p???F
?`?b?v?u???[?J??p??L???v?f?@???C
?????H?w???C58?C12 (1992 ) pp.2051-2056.
?P??p???C????V?C?????O?V?C???~???m?F
????тт?U????????铮?I??????????`????i??Q??j?C
?????H?w???C56?C4 (1990) pp.661-666.
?P??p???C?????C?????O?V?C???~???m?F
????тт?U????????铮?I??????????`????i??P??j,
?????H?w???C55?C11 (1989) pp.2017-2023.