 |
|
|
| 37 |
K. Chida, E. Sogabe, K. Nakamoto ; Best Paper Award, The 27th International Conference on Mechatronics Technology (ICMT2024), Tool Path Generation by Modifying a CAD Model Based on Dimensional Tolerances丆(2024-11). |
| 36 |
M. Xu, O. Riemer, K. Nakamoto, Y. Takeuchi ; 岺嶌婡夿媄弍怳嫽嵿抍 戞44師岺嶌婡夿媄弍怳嫽徿丒榑暥徿, Automated Workpiece Setting Operation by On-Machine Measurement for Efficient Ultraprecision Cutting of Micro-Shapes, (2023-06). |
| 35 |
惣揷峗巌丟儅僓僢僋嵿抍 2022擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, Augmented Reality-Based System for Skill Transfer of Workpiece Fixturing in Turning Operations, (2023-05). |
| 34 |
惣揷峗巌丟惛枾岺妛夛 2022擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛 儀僗僩僾儗僛儞僥乕僔儑儞徿, 弉楙嶌嬈幰偺帇慄僨乕僞傪墖梡偟偨慁嶍壛岺偺抜庢傝巟墖AR僔僗僥儉偵娭偡傞尋媶, (2022-06). |
| 33 |
搉曈梇搇丟儅僓僢僋嵿抍 2021擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, 暋崌壛岺婡偵傛傞妱弌偟5幉壛岺偺偨傔偺壛岺僼傿乕僠儍擣幆庤朄偺採埬, (2022-05). |
| 32 |
彫悪棟媣丟惛枾岺妛夛 戞29夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 岺嶌婡夿偺慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偲壛岺帪娫偵傛傞岺掱昡壙偵娭偡傞尋媶, (2022-03). |
| 31 |
熐栰揘栫, 捤杮丂椓, 拞杮孿堦媦傃傾僀僐僋傾儖僼傽姅幃夛幮丟惛枾岺妛夛 2021擭搙 惛枾岺妛夛忛徿, 壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵傛傞嶌嬈愝寁巟墖僔僗僥儉偺奐敪偵娭偡傞尋媶, (2022-03). |
| 30 |
彫徏丂峲丟儅僓僢僋嵿抍 2020擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, Machining Process Analysis for Machine Tool Selection Based on Form-Shaping Motions, (2021-05). |
| 29 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟擔杮婡夿妛夛 2020擭搙 擔杮婡夿妛夛徿乮榑暥乯, 岺嶌暔偺僩億儘僕乕嵟揔壔偵婎偯偔峳壛岺岺掱偺壛岺弴彉寛掕庤朄偺採埬, (2021-04). |
| 28 |
彫徏丂峲丟惛枾岺妛夛 2021擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛 儀僗僩僾儗僛儞僥乕僔儑儞徿, 暋崌壛岺婡偺婡庬慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偵娭偡傞尋媶, (2021-03). |
| 27 |
徏杮榓恀丟惛枾岺妛夛 戞28夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 壛岺昡壙傪斀塮偟偨婡夿妛廗偵婎偯偔嬥宆壛岺偺岺掱忣曬偺悇掕偵娭偡傞尋媶, (2021-03). |
| 26 |
彫徏丂峲丟擔杮婡夿妛夛 嶰塝徿, (2021-03). |
| 25 |
捤杮丂椓丟擔杮婡夿妛夛 庒庤桪廏島墘僼僃儘乕徿, 2020擭搙擭師戝夛, 晹昳壛岺偺嶌嬈愝寁偺偨傔偺壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵娭偡傞尋媶, (2020-11). |
| 24 |
杒愳丂楑丟儅僓僢僋嵿抍 2019擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, 懡幉惂屼挻惛枾愗嶍壛岺偺崅擻棪壔偵岦偗偨僙僢僥傿儞僌岆嵎曗惓偵婎偯偔岺嬶偲儚乕僋偺帺摦庢晅偗, (2020-05). |
| 23 |
孎栰娈恀斂丟儅僓僢僋嵿抍 2018擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, Complicated Workpiece Shape Machining Using Optimal Target Shape Position and Orientation on a Multifunctional Machine Tool, (2019-05). |
| 22 |
堜尦棟垽丟惛枾岺妛夛 戞26夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 僯儏乕儔儖僱僢僩儚乕僋傪墖梡偟偨嬥宆壛岺偺岺嬶悇掕僔僗僥儉偺奐敪, (2019-03). |
| 21 |
崅嫶扖屴丟儅僓僢僋嵿抍 2017擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, 僩億儘僕乕嵟揔壔偵傛傞峳壛岺岺掱偺岺嶌暔宍忬寛掕庤朄偺採埬, (2018-05). |
| 20 |
崅嫶扖屴丟搶嫗擾岺戝妛 妛惗昞彶乮妛弍尋媶妶摦乯, (2018-03). |
| 19 |
嫶杮恀桼丟搶嫗擾岺戝妛 摨憢夛桪廏懖嬈榑暥昞彶, (2018-03). |
| 18 |
嫶杮恀桼丟惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛 桪廏島墘徿, 僯儏乕儔儖僱僢僩儚乕僋傪梡偄偨暋嶨宍忬嬥宆偺岺掱愝寁巟墖僔僗僥儉偺奐敪, (2018-03). |
| 17 |
惣郪宑桽丟惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, Laser R-Test偵傛傞懡幉惂屼岺嶌婡夿偺婔壗岆嵎摨掕偵娭偡傞尋媶, (2018-03). |
| 16 |
S. Takahashi ; Young Researcher Award, The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), A Study on Workpiece Shapes During a Rough Machining Operation Based on Topology Optimization, (2017-11). |
| 15 |
堜忋桭婱丟儅僓僢僋嵿抍 2016擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, 暋嶨側壛岺岺掱傪庢傝埖偊傞暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺採埬, (2017-05). |
| 14 |
攏応怲擵桟丟擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧 桪廏島墘榑暥昞彶, 挻惛枾婡忋寁應傪梡偄偨僙僢僥傿儞僌岆嵎曗惓庤朄偺奐敪, (2017-03). |
| 13 |
揷拞彔懢榊丟惛枾岺妛夛 2016擭搙 惛枾岺妛夛尋媶彠椼徿, 懡幉惂屼挻惛枾愗嶍壛岺偺崅擻棪壔偵岦偗偨僙僢僥傿儞僌岆嵎曗惓庤朄偺奐敪, (2017-03). |
| 12 |
杒愳丂楑丟惛枾岺妛夛 戞24夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 嶻嬈梡儘儃僢僩傪梡偄偨挻惛枾壛岺婡傊偺儚乕僋偺庢晅偗偵娭偡傞尋媶, (2017-03). |
| 11 |
忋栰丂塴丟儅僓僢僋嵿抍 2015擭搙 儅僓僢僋崅搙惗嶻僔僗僥儉桪廏榑暥徿, 暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺偨傔偺壛岺僼傿乕僠儍偺採埬, (2016-05). |
| 10 |
拞杮孿堦丟暯惉28擭搙 壢妛媄弍暘栰偺暥晹壢妛戝恇昞彶 庒庤壢妛幰徿, 岺嶌婡夿偺帺棩壔偲婡夿壛岺巟墖媄弍偺崅搙壔偵娭偡傞尋媶, (2016-04). |
| 9 |
斅栰寬懢榊丟惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛 桪廏島墘徿, 僩億儘僕乕嵟揔壔傪梡偄偨壛岺搑拞宍忬偺寛掕庤朄偺採埬, (2016-03). |
| 8 |
堜忋桭婱丟惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 攃帩懼偊偲摨帪壛岺傪峫椂偟偨暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉, (2016-03). |
| 7 |
揷拞彔懢榊丟惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 挻惛枾愗嶍壛岺偵偍偗傞僙僢僥傿儞僌岆嵎曗惓偺偨傔偺帋偟嶍傝宍忬偺採埬, (2016-03). |
| 6 |
拞杮尋媶幒丟DMG怷惛婡姅幃夛幮 戞11夞愗嶍壛岺僪儕乕儉僐儞僥僗僩 傾僇僨儈僢僋晹栧 傾僀僨傿傾徿, 擔杮鍧乮儅儉僔乯, (2015-11). |
| 5 |
埨摗弫恖丟惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛 僄僋僙儗儞僩僾儗僛儞僥乕僔儑儞徿, 廮擃暔丒擄攃帩暔偺壛岺巟墖僔僗僥儉偺奐敪, (2015-03). |
| 4 |
攏応怲擵桟丟擔杮婡夿妛夛 庒庤桪廏島墘僼僃儘乕徿, 戞10夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, 僙僢僥傿儞僌岆嵎傪曗惓偟偨旕夞揮岺嬶偵傛傞5幉惂屼挻惛枾愗嶍壛岺, (2014-12). |
| 3 |
K. Nakamoto, M. Ando, Y. Takeuchi ; Excellent Poster Award, The 16th International Machine Tool Engineers乫 Conference (The 16th IMEC), Proposal of Flexible Clamper to Realize Dexterous Machining of Soft Objects, (2014-11). |
| 2 |
V. V. Toan, K. Nakamoto, X. Tang, Y. Takeuchi ; Best Paper Award, The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2013), Ultraprecision Cutting of Silicon Carbide by Rotational Diamond Tool with Special Chamfer, (2013-11). |
| 1 |
X. Tang, K. Nakamoto, Y. Takeuchi ; Excellent Poster Award, The 15th International
Machine Tool Engineers乫 Conference (The 15th IMEC), Ultraprecision Machining
of Hard Material by Suppressing Diamond Tool Wear, (2012-11).
|
仴懕偒傪尒傞
仯偨偨傓
| 38 |
E. Sogabe, K. Nakamoto ; Proposal of an Evaluation Method of Variation in Tool Center Points for Ball-End Milling of Free-Form Surfaces, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 18, No. 2, DOI: 10.1299/jamdsm.2024jamdsm0020, (2024-02).
|
| 37 |
K. Nishida, M. Itoh, K. Nakamoto ; Augmented Reality-Based System for Skill Transfer of Workpiece Fixturing in Turning Operations, International Journal of Automation Technology, Vol. 17, No. 2, pp.136-143, (2023-03).
|
| 36 |
T. Yoshikawa, F. Nakamura, E. Sogabe, K. Nakamoto ; Acquisition of Skills for Process Planning Through Eye Tracking When Understanding Mechanical Drawings, International Journal of Automation Technology, Vol. 17, No. 2, pp.128-135, (2023-03).
|
| 35 |
N. Komura, K. Matsumoto, S. Igari, T. Ogawa, S. Fujita, K. Nakamoto ; Computer Aided Process Planning for Rough Machining Based on Machine Learning with Certainty Evaluation of Inferred Results, International Journal of Automation Technology, Vol. 17, No. 2, pp.120-127, (2023-03).
|
| 34 |
M. Xu, O. Riemer, K. Nakamoto, Y. Takeuchi ; Automated Workpiece Setting Operation by On-Machine Measurement for Efficient Ultraprecision Cutting of Micro-Shapes, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 16, No. 5, DOI: 10.1299/jamdsm.2022jamdsm0054, (2022-10).
|
| 33 |
T. Asano, Y. Watanabe, K. Nakamoto ; Proposal of a Machining Feature Recognition Method to Reflect Product and Manufacturing Information, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 16, No. 1, DOI: 10.1299/jamdsm.2022jamdsm0015, (2022-02).
|
| 32 |
W. Komatsu, K. Nakamoto ; Machining Process Analysis of Multi-Tasking Machine Tools Based on Form-Shaping Motions, Precision Engineering, Vol. 73, pp.332-346, (2022-01).
|
| 31 |
Y. Yao, Y. Itabashi, M. Tsutsumi, K. Nakamoto ; Position Error Reduction of Tool Center Point in Multi-Tasking Machine Tools through Compensating Influence of Geometric Deviations Identified by Ball Bar Measurements, Precision Engineering, Vol. 72, pp.745-755, (2021-11).
|
| 30 |
熐栰揘栫, 捤杮丂椓, 拞杮孿堦丟壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵傛傞嶌嬈愝寁巟墖僔僗僥儉偺奐敪偵娭偡傞尋媶, 惛枾岺妛夛帍, 87姫, 6崋, pp.567-573, (2021-06).
|
| 29 |
M. Kumanotani, H. Kushino, K. Nakamoto ; Proposal of a Tool Path Generation Method for Rough Machining of Complex Shapes Based on Topology Optimization, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 15, No. 2, DOI: 10.1299/jamdsm.2021jamdsm0019, (2021-03).
|
| 28 |
M. Hashimoto, K. Nakamoto ; Process Planning for Die and Mold Machining Based on Pattern Recognition and Deep Learning, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 15, No. 2, DOI: 10.1299/jamdsm.2021jamdsm0015, (2021-03).
|
| 27 |
M. Xu, K. Nakamoto, Y. Takeuchi ; An Efficient Ultraprecision Machining System Automating Setting Operations of Roughly Machined Workpiece, Journal of Manufacturing and Materials Processing, Vol. 5, Issue 1, 11, DOI: 10.3390/jmmp5010011, (2021-01).
|
| 26 |
W. Komatsu, K. Nakamoto ; Machining Process Analysis for Machine Tool Selection Based on Form-Shaping Motions, Precision Engineering, Vol. 67, pp.199-211, (2021-01).
|
| 25 |
Y. Watanabe, K. Nakamoto ; Proposal of a Machining Features Recognition Method for 5-Axis Index Milling on Multi-Tasking Machine Tools, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 14, No. 7, DOI: 10.1299/jamdsm.2020jamdsm0108, (2020-11).
|
| 24 |
W. Komatsu, Y. Inoue, K. Nakamoto ; Proposal of Computer Aided Process Planning of Parts Machining Using Workholding Devices, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 14, No. 3, DOI: 10.1299/jamdsm.2020jamdsm0033, (2020-03).
|
| 23 |
Y. Yao, K. Nishizawa, N. Kato, M. Tsutsumi, K. Nakamoto ; Identification Method of Geometric Deviations for Multi-Tasking Machine Tools Considering the Squareness of Translational Axes, Applied Sciences, Vol. 10, Issue 5, 1811, DOI: 10.3390/app10051811, (2020-03).
|
| 22 |
堜忋桭婱, 拞杮孿堦丟愝寁忣曬傪斀塮偡傞偨傔偺壛岺僼傿乕僠儍擣幆庤朄偺採埬, 擔杮婡夿妛夛榑暥廤, 86姫, 882崋, DOI: 10.1299/transjsme.19-00414, (2020-02).
|
| 21 |
R. Takigawa, K. Kamimura, K. Asami, K. Nakamoto, T. Tomimatsu, T. Asano ; Fabrication of a Bonded LNOI Waveguide Structure on Si Substrate Using Ultra-Precision Cutting, Japanese Journal of Applied Physics, Vol. 59, SBBD03, DOI: 10.7567/1347-4065/ab514e, (2020-02).
|
| 20 |
Y. Inoue, K. Nakamoto ; Development of a CAPP System for Multi-Tasking Machine Tools to Deal with Complicated Machining Operations, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 14, No. 1, DOI: 10.1299/jamdsm.2020jamdsm0006, (2020-01).
|
| 19 |
M. Xu, K. Nakamoto, Y. Takeuchi ; Compensation Method for Tool Setting Errors Based on Non-Contact On-Machine Measurement, International Journal of Automation Technology, Vol. 14, No. 1, pp.66-72, (2020-01).
|
| 18 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟岺嶌暔偺僩億儘僕乕嵟揔壔偵婎偯偔峳壛岺岺掱偺壛岺弴彉寛掕庤朄偺採埬, 擔杮婡夿妛夛榑暥廤, 85姫, 880崋, DOI: 10.1299/transjsme.19-00228, (2019-12).
|
| 17 |
杒愳丂楑, 彊丂朑, 拞杮孿堦, 抾撪朏旤丟懡幉惂屼挻惛枾愗嶍壛岺偺崅擻棪壔偵岦偗偨僙僢僥傿儞僌岆嵎曗惓偵婎偯偔岺嬶偲儚乕僋偺帺摦庢晅偗, 惛枾岺妛夛帍, 85姫, 8崋, pp.722-726, (2019-08).
|
| 16 |
M. Hashimoto, K. Nakamoto ; A Neural Network Based Process Planning System to Infer Tool Path Pattern for Complicated Surface Machining, International Journal of Automation Technology, Vol. 13, No. 1, pp.67-73, (2019-01).
|
| 15 |
M. Kumanotani, K. Nakamoto ; Complicated Workpiece Shape Machining Using Optimal Target Shape Position and Orientation on a Multifunctional Machine Tool, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 12, No. 6, DOI: 10.1299/jamdsm.2018jamdsm0111, (2018-10).
|
| 14 |
崅嫶扖屴, 斅栰寬懢榊, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵傛傞峳壛岺岺掱偺岺嶌暔宍忬寛掕庤朄偺採埬, 擔杮婡夿妛夛榑暥廤, 83姫, 856崋, DOI: 10.1299/transjsme.17-00249, (2017-12). |
| 13 |
堜忋桭婱, 拞杮孿堦丟暋嶨晹昳偺愗嶍壛岺偵岦偗偨岺掱愝寁巟墖僔僗僥儉偺偨傔偺壛岺僼傿乕僠儍擣幆庤朄偺採埬, 擔杮婡夿妛夛榑暥廤, 83姫, 850崋, DOI: 10.1299/transjsme.16-00574, (2017-06). |
| 12 |
N. Shimada, N. Nagashima, K. Nakamoto ; Decision Method of Target Shape Position and Orientation Corresponding to Actual Objects, International Journal of Automation Technology, Vol. 11, No. 2, pp.251-257, (2017-03). |
| 11 |
K. Koremura, Y. Inoue, K. Nakamoto ; Machining Process Evaluation Indices for Developing a Computer Aided Process Planning System, International Journal of Automation Technology, Vol. 11, No. 2, pp.242-250, (2017-03). |
| 10 |
K. Nakamoto, Y. Takeuchi ; Recent Advances in Multiaxis Control and Multitasking Machining, International Journal of Automation Technology, Vol. 11, No. 2, pp.140-154, (2017-03). (Review) |
| 9 |
揷拞彔懢榊, 攏応怲擵桟, 拞杮孿堦, 抾撪朏旤丟懡幉惂屼挻惛枾愗嶍壛岺偺崅擻棪壔偵岦偗偨僙僢僥傿儞僌岆嵎曗惓庤朄偺奐敪, 惛枾岺妛夛帍, 82姫, 8崋, pp.758-763, (2016-08). |
| 8 |
S. Baba, K. Nakamoto, Y. Takeuchi ; Multi-Axis Control Ultraprecision Machining Based on Tool Setting Errors Compensation, International Journal of Automation Technology, Vol. 10, No. 1, pp.114-120, (2016-01). |
| 7 |
忋栰丂塴, 拞杮孿堦丟暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺偨傔偺壛岺僼傿乕僠儍偺採埬, 擔杮婡夿妛夛榑暥廤, 81姫, 825崋, DOI: 10.1299/transjsme.15-00108, (2015-05). |
| 6 |
拞杮孿堦, 庒徏峅婲, 抾撪朏旤丟懡岴幙丒廮擃岺嶌暔偺岻柇壛岺, 擔杮婡夿妛夛榑暥廤, 81姫, 825崋, DOI: 10.1299/transjsme.14-00680, (2015-05). |
| 5 |
K. Nakamoto, T. Iizuka, Y. Takeuchi ; Dexterous Machining of Soft Objects by Means of Flexible Clamper, International Journal of Automation Technology, Vol. 9, No. 1, pp.83-88, (2015-01). |
| 4 |
X. Tang, K. Nakamoto, K. Obata, Y. Takeuchi ; Ultraprecision Micromachining of Hard Material with Tool Wear Suppression
by Using Diamond Tool with Special Chamfer, CIRP Annals - Manufacturing Technology, Vol. 62, Issue 1, pp.51-54, (2013-08).
|
| 3 |
搨丂恏塻, 拞杮孿堦, 彫敥堦巙, 抾撪朏旤丟恘愭堏摦壛岺朄傪梡偄偨嬋慄峚偲嬋柺偺挻惛枾儅僀僋儘壛岺, 惛枾岺妛夛帍, 79姫, 2崋, pp.165-169,
(2013-02).
|
| 2 |
K. Shirase, K. Nakamoto ; Simulation Technologies for the Development of
an Autonomous and Intelligent Machine Tool, International Journal of Automation
Technology, Vol. 7, No. 1, pp.6-15, (2013-01).
|
| 1 |
搨丂恏塻, 拞杮孿堦, 彫敥堦巙, 愇揷丂揙, 抾撪朏旤丟摿庩僠儍儞僼傽晅偒岺嬶偵傛傞恘愭堏摦壛岺朄偺岠壥, 惛枾岺妛夛帍, 78姫, 8崋,
pp.705-709, (2012-08).
|
仴懕偒傪尒傞
仯偨偨傓
| 崙嵺夛媍 |
International conference |
| 63 |
K. Chida, E. Sogabe, K. Nakamoto ; Tool Path Generation by Modifying a CAD Model Based on Dimensional Tolerances, Proceedings of the 27th International Conference on Mechatronics Technology (ICMT2024), Paper 25, (2024-11).
|
| 62 |
H. Sairenchi, H. Yokoyama, K. Nakamoto ; Inference of Cognitive Load When Understanding Mechanical Drawings by Electroencephalography for Interviews Toward Skill Acquisition, Proceedings of the 27th International Conference on Mechatronics Technology (ICMT2024), Paper 24, (2024-11).
|
| 61 |
M. Miyata, Y. Shinto, M. Imahashi, M. Itoh, K. Nakamoto ; Study on Augmented Reality-Based System to Support Workpiece Fixturing on a Machining Center, Proceedings of the 27th International Conference on Mechatronics Technology (ICMT2024), Paper 16, (2024-11).
|
| 60 |
T. Takanami, S. Watabe, N. Akiyama, K. Sannomiya, T. Nakaya, K. Nakamoto ; A Study on Computer Aided Process Planning to Realize Parts Machining on a Sliding Headstock Lathe, Proceedings of the 20th International Conference on Precision Engineering (ICPE2024), OS01-10, (2024-10).
|
| 59 |
E. Sogabe, K. Nakamoto ; A Study on Suppression of Variation in Tool Center Points for Ball-End Milling of Free-Form Surfaces, Proceedings of the 20th International Conference on Precision Engineering (ICPE2024), OS01-08, (2024-10).
|
| 58 |
R. Hamanaka, E. Sogabe, K. Nakamoto ; A Study on Computer Aided Process Planning to Allocate the Operation Sequence by Referring to Workpiece Material, Proceedings of the 20th International Conference on Precision Engineering (ICPE2024), OS01-07, (2024-10).
|
| 57 |
K. Harada, S. Usami, K. Nakamoto ; A Study on Recognition of Machining Features Based on Graph Neural Network for Die and Mold Machining, Proceedings of the 2024 International Symposium on Flexible Automation (ISFA2024), 144561, (2024-07).
|
| 56 |
K. Nakamoto ; Studies toward DX in Machining by a Computer Aided Process Planning System, Proceedings of the International Symposium on Precision Engineering and Sustainable Manufacturing 2024 (PRESM 2024), M3-FC2, (2024-07). (Keynote)
|
| 55 |
K. Oike, S. Kodama, K. Nakamoto ; Fabrication of Curved Laser-Induced Periodic Surface Structure Along Created Microgrooves by Ultraprecision Cutting, Proceedings of the 19th International Conference on Precision Engineering (ICPE2022), C128, (2022-12).
|
| 54 |
K. Akisue, K. Nakamoto ; A Study on Computer Aided Process Planning for Fixed Workpieces on a 5-Axis Controlled Machine Tool, Proceedings of the 19th International Conference on Precision Engineering (ICPE2022), C129, (2022-11).
|
| 53 |
K. Nishida, M. Itoh, K. Nakamoto ; An AR System Using Gaze Data of Skilled Operators for Setting Operation of Turning, Proceedings of the 2022 International Symposium on Flexible Automation (ISFA2022), pp.87-88, (2022-07).
|
| 52 |
M. Xu, K. Nakamoto, Y. Takeuchi ; Workpiece Setting Errors Compensation for Efficient Ultraprecision Machining of a Free-Form Surface with Micro-Grooves, Proceedings of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), G15, (2021-11).
|
| 51 |
K. Matsumoto, S. Igari, T. Ogawa, S. Fujita, K. Nakamoto ; Study on Inference of Operation Parameters for Die and Mold Machining by Machine Learning Based on Evaluations, Proceedings of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), A14, (2021-11).
|
| 50 |
Y. Yao, Y. Itabashi, M. Tsutsumi, K. Nakamoto ; A Simple Measuring Procedure to Identify Geometric Deviations of Multi-tasking Machine Tools by a Touch-trigger Probe, Proceedings of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), B07, (2021-11).
|
| 49 |
T. Asano, H. Kawakami, K. Nakamoto ; A Study on Machining Process Selection Using Machine Learning Based on Recognized Machining Features, Proceedings of the International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021 (iDECON/MS2021), 28, (2021-09).
|
| 48 |
K. Oike, S. Kodama, K. Nakamoto, Y. Takeuchi ; Control of Straight Laser Induced Periodic Surface Structures on Aluminium Alloy by Ultraprecision Cutting, Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2021), pp.155-156, (2021-06).
|
| 47 |
T. Yoshikawa, K. Nakamoto ; A Study on Eye Tracking While Understanding Mechanical Drawings to Visualize Skills for Process Planning, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-4-8, (2020-11).
|
| 46 |
N. Komura, M. Hashimoto, K. Nakamoto ; A Study on Sample Data Generation to Evaluate a Neural Network Based Process Planning System, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-4-7, (2020-11).
|
| 45 |
Y. Watanabe, K. Nakamoto ; A Study on Machining Features Recognition for 5-axis Index Milling on Multi-Tasking Machine Tools, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-4-6, (2020-11).
|
| 44 |
R. Tsukamoto, T. Asano, K. Nakamoto ; Proposal of an Operation Planning System Using Case-Based Reasoning with Adjustment for Case Retrieval, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-4-5, (2020-11).
|
| 43 |
S. Yanagimoto, K. Saito, K. Nakamoto ; Proposal of a Detection Method of Similar Target Shapes for Automated Process Planning, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-1-8, (2020-11).
|
| 42 |
W. Komatsu, K. Nakamoto ; A Study on Machining Process Analysis of Recognized Machining Features Based on Form-Shaping Motions, Proceedings of the 18th International Conference on Precision Engineering (ICPE2020), A-1-3, (2020-11).
|
| 41 |
Y. Yao, Y. Itabashi, K. Nishizawa, M. Tsutsumi, K. Nakamoto ; Proposal of Identification and Compensation Method of Geometric Deviations for Multi-tasking Machine Tools to Improve Motion Accuracy, Proceedings of the International Symposium on Precision Engineering and Sustainable Manufacturing 2020 (PRESM 2020), P-061, (2020-11).
|
| 40 |
M. Xu, N. Yokoyama, K. Nakamoto, Y. Takeuchi ; On-Machine Diamond Tool Shaping of to Realize Highly Efficient Ultraprecision Machining System, Proceedings of the ASME 2020 International Symposium on Flexible Automation (ISFA2020), ISFA2020-9605, (2020-07).
|
| 39 |
M Kumanotani, H. Kushino, K. Nakamoto ; Proposal of a Tool Path Generation Method to Ensure Workpiece Stiffness for Efficient Rough Machining, Proceedings of the JSME 2020 Conference on Leading Edge Manufacturing / Materials and Processing (LEMP2020), LEMP2020-8543, (2020-06).
|
| 38 |
M. Xu, K. Nakamoto, Y. Takeuchi ; Efficient Ultraprecision Machining System by Means of Industrial Robot, Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2020), pp.233-234, (2020-06).
|
| 37 |
Y. Yao, K. Nishizawa, N. Kato, M. Tsutsumi, K. Nakamoto ; Identification Method of Geometric Deviations for Multi-tasking Machine Tools with a Swivel Tool Spindle Head in Vertical Position, Proceedings of the 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), USB B37, (2019-11).
|
| 36 |
T. Hirano, K. Nakamoto, Y. Takeuchi ; A Study on Tool Path Generation for Ultraprecision Cutting of Free Form Surface with Micro Texture, Proceedings of the 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), USB D17, (2019-11).
|
| 35 |
N. Yokoyama, M. Xu, K. Nakamoto, Y. Takeuchi ; A Study on On-Machine Shaping of Diamond Tool to Realize Highly Efficient Ultraprecision Cutting, Proceedings of the 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), USB D15, (2019-11).
|
| 34 |
H. Kushino, M. Kumanotani, K. Nakamoto ; A Study on Tool Path Generation During a Rough Machining Operation Based on Topology Optimization of Workpiece, Proceedings of the International Conference on Design and Concurrent Engineering 2019 & Manufacturing Systems Conference 2019 (iDECON/MS2019), S-17, (2019-09).
|
| 33 |
M. Hashimoto, K. Nakamoto ; A Study on Process Planning for Die and Mold Machining Based on Shape Recognition and Deep Learning, Proceedings of the International Conference on Design and Concurrent Engineering 2019 & Manufacturing Systems Conference 2019 (iDECON/MS2019), R-13, (2019-09).
|
| 32 |
M. Xu, R. Kitakawa, K. Nakamoto, Y. Takeuchi ; Automated Workpiece Setting Operation and Its Errors Compensation on an Ultraprecision Machine Tool, Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2019), pp.386-387, (2019-06).
|
| 31 |
M. Kumanotani, H. Kushino, K. Nakamoto ; Proposal of Complex Parts Machining Securing Dynamic Stiffness of Workpiece During a Rough Machining Operation, Proceedings of the 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019), FR-C-1-5, (2019-04). |
| 30 |
W. Komatsu, Y. Inoue, K. Nakamoto ; A Study on Computer Aided Process Planning of Parts Machining under Fixing Limitations, Proceedings of the 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019), FR-C-1-4, (2019-04). |
| 29 |
M. Xu, R. Kitakawa, K. Nakamoto, Y. Takeuchi ; A Study on Tool Setting Errors Compensation by Means of Non-contact Measurement on an Ultraprecision Machine Tool, Proceedings of the 17th International Conference on Precision Engineering (ICPE2018), USB B-3-4, (2018-11). |
| 28 |
H. Kushino, M Kumanotani, K. Nakamoto ; Proposal of a Determination Method of Cutting Sequence Based on Optimal Workpiece Shapes During a Machining Operation, Proceedings of the 17th International Conference on Precision Engineering (ICPE2018), USB A-4-5, (2018-11). |
| 27 |
T. Igarashi, T Asano, K. Nakamoto ; Proposal of an Operation Planning System by Case-Based Reasoning Using Machining Feature Information, Proceedings of the 17th International Conference on Precision Engineering (ICPE2018), USB A-1-3, (2018-11). |
| 26 |
Y. Inoue, K. Nakamoto ; A Study on Process Planning for Multi-tasking Machine Tools Dealing with Complicated Machining Operations, Proceedings of the 22nd International Conference on Mechatronics Technology (ICMT2018), USB 27, (2018-10). |
| 25 |
M. Kumanotani, K. Nakamoto ; Proposal of a Decision Method of Target Shape Position and Orientation for High Efficient Machining of Complicated Workpiece Shapes, Proceedings of 2018 International Symposium on Flexible Automation (ISFA2018), USB 50, (2018-07). |
| 24 |
M. Hashimoto, K. Nakamoto ; A Study on Process Planning of Tool Path Pattern for Die and Mold Surfaces by Using Neural Network, Proceedings of 2018 International Symposium on Flexible Automation (ISFA2018), USB 52, (2018-07). |
| 23 |
R. Kitakawa, K. Nakamoto, Y. Takeuchi ; Three-dimensional Micro Shape Creation on a Workpiece Located by Industrial Robot, Proceedings of the International Symposium on Precision Engineering and Sustainable Manufacturing 2018 (PRESM 2018), OP071, (2018-07). |
| 22 |
R. Kitakawa, T. Kon, K. Nakamoto, Y. Takeuchi ; Three-dimensional Micro Shape Creation by On-machine Scanning Measurement, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2018), pp.135-136, (2018-06). |
| 21 |
R. Kitakawa, K. Nakamoto, Y. Takeuchi ; A Study on Automatic Compensation of Workpiece Setting Errors in Ultraprecision Machining, Proceedings of the 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2017), USB MSM-P-01, (2017-11). |
| 20 |
Y. Inoue, K. Nakamoto ; A Study on Machining Feature Recognition to Achieve Multi-axis Machining of Complicated Shapes, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), USB 137, (2017-11). |
| 19 |
T. Kon, K. Nakamoto, Y. Takeuchi ; A Study on Machining Error Estimation of Micro Complicated Shapes by On-machine Scanning Measurement, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), USB 141, (2017-11). |
| 18 |
S. Takahashi, K. Nakamoto ; A Study on Workpiece Shapes During a Rough Machining Operation Based on Topology Optimization, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), USB 138, (2017-11). |
| 17 |
K. Nakamoto, R. Kitakawa, Y. Takeuchi ; Setting Errors Compensation of a Workpiece Located by Industrial Robots, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2017), pp.223-224, (2017-05). |
| 16 |
T. Tamura, K. Nakamoto, Y. Takeuchi ; A Study on Probe Path Generation for 5-axis Control On-machine Measurement, Proceedings of the 16th International Conference on Precision Engineering (ICPE2016), USB B308-8097, (2016-11). |
| 15 |
Y. Inoue, K. Koremura, K. Nakamoto ; Proposal of a CAPP System for Multi-tasking Machine Tools Dealing with Complicated Machining Operations, Proceedings of the 16th International Conference on Precision Engineering (ICPE2016), USB B307-8095, (2016-11). |
| 14 |
K. Koremura, Y. Inoue, K. Nakamoto ; Machining Process Evaluation Indexes of Multi-tasking Machine Tools, Proceedings of the 20th International Conference on Mechatronics Technology (ICMT2016), pp.170-171, (2016-10). |
| 13 |
N. Shimada, N. Nagashima, K. Nakamoto ; Decision of Target Shape Position and Posture in Machine Simulator Corresponding to Actual Workpiece, Proceedings of 2016 International Symposium on Flexible Automation (ISFA2016), pp.255-258, (2016-08). |
| 12 |
K. Nakamoto, S. Baba, Y. Takeuchi ; Automatic Tool Setting Errors Compensation in Ultraprecision Machining, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2016), P7.01, (2016-06). |
| 11 |
S. Baba, K. Nakamoto, Y. Takeuchi ; A Study on Tool Setting Errors Compensation by Using an On-machine Measurement Device, Proceedings of the 19th International Conference on Mechatronics Technology (ICMT2015), USB B02, (2015-11). |
| 10 |
K. Koremura, K. Nakamoto ; A Study on Process Evaluation Indexes for a Computer Aided Process Planning System, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), CD-ROM 0302, (2015-10). |
| 9 |
N. Shimada, K. Nakamoto ; A Study on 3D Model Generation of a Machine Simulator Corresponding to Actual Objects, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), CD-ROM 0301, (2015-10). |
| 8 |
T. Tamura, K. Nakamoto, Y. Takeuchi ; A Study on Decision of Probe Attitude for On-machine Measurement, Proceedings of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2015), USB 137, (2015-08). |
| 7 |
K. Nakamoto, T. Yamagishi, C. H. Ko, Y. Takeuchi ; 6-axis Control Ultraprecision Machining based on Compensation of Tool Setting Errors, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2015), pp.297-298, (2015-06). |
| 6 |
S. Baba, K. Nakamoto, Y. Takeuchi ; 5-axis Control Ultraprecision Machining Based on Tool Setting Errors Compensation, Proceedings of the 18th International Conference on Mechatronics Technology (ICMT2014), USB 38, (2014-10). |
| 5 |
A. Ueno, K. Nakamoto ; Proposal of Machining Features for CAPP System for Complex Machining, Proceedings of the 15th International Conference on Precision Engineering (ICPE2014), pp.536-537, (2014-07). |
| 4 |
K. Nakamoto, K. Sugiyama, Y. Takeuchi ; Tool Setting of Error Compensation for Multi-axis Control Ultraprecision Machining, Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2014), Vol. 2, pp.43-46, (2014-06). |
| 3 |
V. V. Toan, K. Nakamoto, X. Tang, Y. Takeuchi ; Ultraprecision Cutting of Silicon Carbide by Rotational Diamond Tool with Special Chamfer, Proceedings of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2013), USB 1175, (2013-11).
|
| 2 |
K. Nakamoto, K. Shirase ; Development of an Autonomous Machine Tool without
the Need to Prepare an NC Program, Proceedings of International Symposium
on Ultraprecision Engineering and Nanotechnology (ISUPEN2013), pp.19-22,
(2013-03). (Invited)
|
| 1 |
X. Tang, K. Nakamoto, K. Obata, Y. Takeuchi ; The Effect of Cutting Point
Swivel Machining by Using Round Tool with Special Chamfer, Proceedings
of the 14th International Conference on Precision Engineering (ICPE2012),
pp.119-124, (2012-11).
|
仴懕偒傪尒傞
仯偨偨傓
| 67 |
尨揷岶堦, 塅嵅尒廋屷, 彫懞彯巎, 拞杮孿堦丟僌儔僼僯儏乕儔儖僱僢僩儚乕僋傪梡偄偨嬥宆壛岺偵偍偗傞岺掱愝寁巟墖偵娭偡傞尋媶, 擔杮婡夿妛夛 戞15夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.330-332, (2024-10). |
| 66 |
惣楢抧廏搇, 墶嶳丂岝, 拞杮孿堦丟媄擻妉摼偵岦偗偨擼攇應掕偵傛傞恾柺撉夝帪偺擣抦晧壸悇掕偵娭偡傞尋媶, 擔杮婡夿妛夛 戞15夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.327-329, (2024-10). |
| 65 |
媨揷垽搇, 怴屗桬婓, 崱嫶惓柧, 埳摗夒晀, 拞杮孿堦丟儅僔僯儞僌僙儞僞傊偺儚乕僋偺屌掕傪巟墖偡傞AR僔僗僥儉偵娭偡傞尋媶, 2024擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.61-62, (2024-09). |
| 64 |
郷拞丂椚, 慮変晹塸夘, 拞杮孿堦丟弉楙嶌嬈幰偺媄擻揱彸偵傛傞岺嶌暔嵽椏偵墳偠偨岺掱愝寁偵娭偡傞尋媶, 2024擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.59-60, (2024-09). |
| 63 |
崅攇懢堦, 搉晹廋堦, 廐嶳捈庽, 嶰媨堦旻, 拞扟懜堦, 拞杮孿堦丟帺摦慁斦偵傛傞検嶻晹昳壛岺偵岦偗偨岺掱愝寁巟墖僔僗僥儉偵娭偡傞尋媶, 2024擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.57-58, (2024-09). |
| 62 |
杻惗丂岻, 彫悪棟媣, 拞杮孿堦丟岺嶌婡夿偺慖掕偵岦偗偰曐桳岺嬶傪斀塮偟偨壛岺岺掱偺暘愅偵娭偡傞尋媶, 2024擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, p.782, (2024-03). |
| 61 |
愮揷堦婸, 憡攏孾桟, 慮変晹塸夘, 拞杮孿堦丟岺嬶宱楬惗惉偺偨傔偺曅懁岞嵎偑巜掕偝傟偨CAD儌僨儖偺廋惓偵娭偡傞尋媶, 2023擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, p.362, (2023-09). |
| 60 |
徏杮榓恀, 摗揷丂徦, 庒搚峩堦, 憹媨懽摽, 拞杮孿堦丟儅儖僠儔儀儖妛廗傪梡偄偨岺掱愝寁巟墖僔僗僥儉偺奐敪偵娭偡傞尋媶, 2023擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, p.660, (2023-03). |
| 59 |
惣揷峗巌, 埳摗夒晀, 拞杮孿堦丟僼儔僀僗壛岺偺儚乕僋偺庢晅偗傪巟墖偡傞AR僔僗僥儉偵娭偡傞尋媶, 擔杮婡夿妛夛 戞14夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.431-433, (2022-10). |
| 58 |
斅嫶樞庽, 拞杮孿堦丟暋崌壛岺婡偵傛傞検嶻晹昳偺婡夿壛岺偵岦偗偨岺掱愝寁巟墖僔僗僥儉偵娭偡傞尋媶, 2022擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.260-261, (2022-09). |
| 57 |
彫悪棟媣, 拞杮孿堦丟岺嶌婡夿偺慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偲壛岺岺掱偺昡壙偵娭偡傞尋媶, 2022擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.258-259, (2022-09). |
| 56 |
惣揷峗巌, 埳摗夒晀, 拞杮孿堦丟弉楙嶌嬈幰偺帇慄僨乕僞傪墖梡偟偨慁嶍壛岺偺抜庢傝巟墖AR僔僗僥儉偵娭偡傞尋媶, 2022擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.94-95, (2022-03). |
| 55 |
搉曈梇搇, 熐栰揘栫, 拞杮孿堦丟惢昳惢憿忣曬傪斀塮偟偨壛岺僼傿乕僠儍偺擣幆曽朄偺奐敪偵娭偡傞尋媶, 2021擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.241-242, (2021-09). |
| 54 |
彫徏丂峲, 拞杮孿堦丟暋崌壛岺婡偺婡庬慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偵娭偡傞尋媶, 2021擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.226-227, (2021-03). |
| 53 |
彫懞彯巎, 拞杮孿堦丟儃僋僙儖儌僨儖傪梡偄偨婡夿妛廗偵傛傞嬥宆偺峳壛岺偺岺掱愝寁巟墖偵娭偡傞尋媶, 2021擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.101-102, (2021-03). |
| 52 |
桍杮揘巙, 嵵摗惔榓, 拞杮孿堦丟帺摦岺掱愝寁傪栚巜偟偨椶帡栚昗宍忬拪弌僔僗僥儉偺奐敪偵娭偡傞尋媶, 擔杮婡夿妛夛 2020擭搙擭師戝夛, S13104, (2020-09). |
| 51 |
捤杮丂椓, 熐栰揘栫, 拞杮孿堦丟晹昳壛岺偺嶌嬈愝寁偺偨傔偺壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵娭偡傞尋媶, 擔杮婡夿妛夛 2020擭搙擭師戝夛, S13103, (2020-09). |
| 50 |
搉曈梇搇, 拞杮孿堦丟妱弌偟5幉壛岺偺偨傔偺壛岺僼傿乕僠儍擣幆曽朄偺奐敪偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.126-127, (2020-09). |
| 49 |
彫懞彯巎, 嫶杮恀桼, 拞杮孿堦丟嬥宆壛岺偵岦偗偨婡夿妛廗傪墖梡偟偨岺掱愝寁偺昡壙偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.71-72, (2020-09). |
| 48 |
媑愳戱柌, 拞杮孿堦丟傾僀僩儔僢僉儞僌偵傛傞岺掱愝寁偵娭傢傞媄擻偺壜帇壔偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.53-54, (2020-09). |
| 47 |
桍杮揘巙, 嵵摗惔榓, 拞杮孿堦丟壛岺帠椺偵婎偯偄偨岺掱愝寁偺偨傔偺椶帡宍忬拪弌僔僗僥儉偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2020, pp.63-64, (2020-03). |
| 46 |
捤杮丂椓, 熐栰揘栫, 拞杮孿堦丟帠椺儀乕僗悇榑偵傛傞晹昳壛岺偺嶌嬈愝寁巟墖僔僗僥儉偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2020, pp.61-62, (2020-03). |
| 45 |
堜忋桭婱, 拞杮孿堦丟懡幉丒暋崌壛岺婡偺偨傔偺岺掱愝寁巟墖僔僗僥儉偺奐敪偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.62-63, (2020-03). |
| 44 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟僩億儘僕乕嵟揔壔傪梡偄偰惗惉偟偨岺嬶宱楬偵傛傞3師尦宍忬壛岺偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.60-61, (2020-03). |
| 43 |
熐栰揘栫, 捤杮丂椓, 拞杮孿堦丟壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵傛傞嶌嬈愝寁偵娭偡傞尋媶, 2020擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.58-59, (2020-03). |
| 42 |
彫徏丂峲, 拞杮孿堦丟岺嶌婡夿偺婡庬慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偵娭偡傞尋媶, 擔杮婡夿妛夛 戞13夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.272-275, (2019-10). |
| 41 |
搉曈梇搇, 堜忋桭婱, 拞杮孿堦丟妱弌偟5幉惂屼偵傛傞峳壛岺偺岠棪壔偵岦偗偨岺嬶巔惃寛掕偵娭偡傞尋媶, 擔杮婡夿妛夛 戞13夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.269-271, (2019-10). |
| 40 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟壛岺搑拞偺岺嶌暔偺崉惈傪妋曐偡傞偨傔偺岺嬶宱楬惗惉偵娭偡傞尋媶, 擔杮婡夿妛夛 戞13夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.265-268, (2019-10). |
| 39 |
堜忋桭婱, 拞杮孿堦丟岞嵎忣曬傪嶲徠偟偨岺掱愝寁偺偨傔偺壛岺僼傿乕僠儍擣幆庤朄偺採埬, 擔杮婡夿妛夛 2019擭搙擭師戝夛, S13103, (2019-09). |
| 38 |
嫶杮恀桼, 拞杮孿堦丟儃僋僙儖儌僨儖偲Deep Learning偵傛傞嬥宆壛岺偺岺嬶宱楬僷僞乕儞偺悇掕偵娭偡傞尋媶, 2019擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.498-499, (2019-09). |
| 37 |
惣郪宑桽, 汱丂婂, 壛摗嫵擵, 掔丂惓恇, 拞杮孿堦丟悅捈曽岦偺岺嬶庡幉傪桳偡傞暋崌壛岺婡偺婔壗惛搙摨掕曽朄, 2019擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.496-497, (2019-09). |
| 36 |
杒愳丂楑, 彊丂朑, 拞杮孿堦, 抾撪朏旤丟挻惛枾愗嶍壛岺偺帺摦僙僢僥傿儞僌偵岦偗偨儚乕僋偺庢晅偗岆嵎曗惓偵娭偡傞尋媶, 2019擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.189-190, (2019-03). |
| 35 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟岺嶌暔偺僩億儘僕乕嵟揔壔偵傛傞峳壛岺岺掱偺岺嬶宱楬惗惉偵娭偡傞尋媶, 2019擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.187-188, (2019-03). |
| 34 |
孎栰娈恀斂, 孂栰恗巌, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵傛傞摦崉惈傪峫椂偟偨壛岺搑拞偺岺嶌暔宍忬寛掕庤朄偺採埬, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2019, pp.49-50, (2019-03). |
| 33 |
忋懞孾屽, 懡婌愳 椙, 拞杮孿堦丟挻惛枾愗嶍壛岺偵傛傞LNOI岝摫攇楬偺嶌惢, 戞66夞墳梡暔棟妛夛弔婫妛弍島墘夛, p.03-642, (2019-03). |
| 32 |
屲廫棐妜巎, 愺栰揘栫, 拞杮孿堦丟壛岺僼傿乕僠儍傪梡偄偨帠椺儀乕僗悇榑偵傛傞愗嶍壛岺偺嶌嬈愝寁, 惛枾岺妛夛 愗嶍壛岺愱栧埾堳夛 暯惉30擭搙儚乕僋僔儑僢僾, pp.5-6, (2018-10).
|
| 31 |
孂栰恗巌, 孎栰娈恀斂, 拞杮孿堦丟岺嶌暔偺僩億儘僕乕嵟揔壔偵婎偯偄偨峳壛岺岺掱偺壛岺弴彉寛掕庤朄偵娭偡傞尋媶, 擔杮婡夿妛夛 戞12夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, A25, (2018-10). |
| 30 |
嫶杮恀桼, 拞杮孿堦丟僯儏乕儔儖僱僢僩儚乕僋偵傛傞嬥宆堄彔柺偺岺嬶宱楬僷僞乕儞偺悇掕偵娭偡傞尋媶, 2018擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.203-204, (2018-09). |
| 29 |
堜忋桭婱, 拞杮孿堦丟暋嶨宍忬晹昳偺懡幉丒暋崌壛岺偵岦偗偨壛岺僼傿乕僠儍擣幆庤朄偺採埬, 2018擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.699-700, (2018-03). |
| 28 |
屲廫棐妜巎, 愺栰揘栫, 拞杮孿堦丟壛岺僼傿乕僠儍傪娷傓帠椺儀乕僗悇榑偵傛傞嶌嬈愝寁偵娭偡傞尋媶, 2018擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.697-698, (2018-03). |
| 27 |
孎栰娈恀斂, 拞杮孿堦丟懡婡擻岺嶌婡夿偵偍偗傞暋嶨岺嶌暔宍忬偵懳偡傞愗嶍壛岺偺岠棪壔偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2018, pp.121-122, (2018-03). |
| 26 |
崅嫶扖屴, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵傛傞峳壛岺岺掱偺壛岺庤弴寛掕庤朄偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2018, pp.119-120, (2018-03). |
| 25 |
崅嫶扖屴, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵婎偯偄偨岺嶌暔宍忬偵廬偭偨峳壛岺岺掱偵娭偡傞尋媶, 惛枾岺妛夛 愗嶍壛岺愱栧埾堳夛 暯惉29擭搙儚乕僋僔儑僢僾, pp.3-4, (2017-12). |
| 24 |
杒愳丂楑, 拞杮孿堦, 抾撪朏旤丟嶻嬈梡儘儃僢僩傪梡偄偨挻惛枾壛岺婡傊偺儚乕僋偺庢晅偗偵娭偡傞尋媶, 2017擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.397-398, (2017-09). |
| 23 |
彫尨寬堦楴, 拞杮孿堦, 抾撪朏旤丟岺嬶杸栒傪棙梡偟偨僟僀儎儌儞僪岺嬶偺婡忋惉宍偵娭偡傞婎慴尋媶, 擔杮婡夿妛夛 2017擭搙擭師戝夛, S1310201, (2017-09). |
| 22 |
孎栰娈恀斂, 搰揷捈栱, 拞杮孿堦丟暋嶨岺嶌暔宍忬偐傜偺愗嶍壛岺偵岦偗偨栚昗宍忬偺埵抲丒巔惃寛掕庤朄偺採埬, 擔杮婡夿妛夛 2017擭搙擭師戝夛, G1400103, (2017-09). |
| 21 |
堜忋桭婱, 拞杮孿堦丟暋嶨宍忬偵懳墳偟偨岺掱愝寁巟墖僔僗僥儉偺壛岺僼傿乕僠儍擣幆偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2017, pp.109-110, (2017-03). |
| 20 |
崅嫶扖屴, 拞杮孿堦丟3師尦宍忬壛岺偵偍偗傞岺嶌暔搑拞宍忬偺僩億儘僕乕嵟揔壔偵娭偡傞尋媶, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2017, pp.107-108, (2017-03). |
| 19 |
揷懞戱嵠, 拞杮孿堦, 抾撪朏旤丟儅僀僋儘暋嶨宍忬偺懡幉婡忋寁應偺偨傔偺僾儘乕僽宱楬惗惉偵娭偡傞尋媶, 2017擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.219-220, (2017-03). |
| 18 |
搰揷捈栱, 拞杮孿堦丟懡幉丒暋崌壛岺婡偺偨傔偺尰暔梈崌宆CAM僔僗僥儉偵娭偡傞尋媶, 2017擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.217-218, (2017-03). |
| 17 |
堃懞寬懢, 屲廫棐妜巎, 拞杮孿堦丟岺掱愝寁偵岦偗偨昡壙巜昗偵傛傞暋崌壛岺婡偺壛岺岺掱偺梊應偵娭偡傞尋媶, 2017擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.215-216, (2017-03). |
| 16 |
崅嫶扖屴, 斅栰寬懢榊, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵傛傞壛岺搑拞偺岺嶌暔宍忬偺寛掕庤朄偺採埬, 惛枾岺妛夛 愗嶍壛岺愱栧埾堳夛 暯惉28擭搙儚乕僋僔儑僢僾, pp.21-22, (2016-11). |
| 15 |
嬤丂懽椙, 揷懞戱嵠, 拞杮孿堦, 抾撪朏旤丟挻惛枾愗嶍壛岺偵偍偗傞婡忋寁應偺偨傔偺僙僢僥傿儞僌岆嵎偺塭嬁夝愅偵娭偡傞尋媶, 擔杮婡夿妛夛 戞11夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.61-62, (2016-10). |
| 14 |
崅嫶扖屴, 斅栰寬懢榊, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵傛傞壛岺搑拞宍忬偺寛掕庤朄偵娭偡傞尋媶, 擔杮婡夿妛夛 戞11夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.59-60, (2016-10). |
| 13 |
堜忋桭婱, 堃懞寬懢, 拞杮孿堦丟攃帩懼偊偲摨帪壛岺傪壜擻偵偡傞暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺奐敪, 擔杮婡夿妛夛 2016擭搙擭師戝夛, S1430101, (2016-09). |
| 12 |
搰揷捈栱, 挿搰丂怢, 拞杮孿堦丟婡忋寁應偵婎偯偄偨栚昗宍忬偺埵抲丒巔惃寛掕庤朄偺採埬, 2016擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.689-690, (2016-09). |
| 11 |
堃懞寬懢, 拞杮孿堦丟岺掱愝寁巟墖僔僗僥儉偺奐敪偵岦偗偨岺掱昡壙巜昗偵傛傞壛岺岺掱偺梊應, 2016擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.71-72, (2016-03). |
| 10 |
攏応怲擵桟, 拞杮孿堦, 抾撪朏旤丟挻惛枾婡忋寁應傪梡偄偨僙僢僥傿儞僌岆嵎曗惓庤朄偺奐敪, 擔杮婡夿妛夛 惗嶻僔僗僥儉晹栧尋媶敪昞島墘夛2016, pp.101-102, (2016-03). |
| 9 |
搰揷捈栱, 拞杮孿堦丟尰暔梈崌宆儅僔儞僔儈儏儗乕僞偵傛傞NC僾儘僌儔儉偺廋惓偵娭偡傞尋媶, 惛枾岺妛夛 愗嶍壛岺愱栧埾堳夛 暯惉27擭搙儚乕僋僔儑僢僾, pp.41-42, (2015-11). |
| 8 |
堃懞寬懢, 拞杮孿堦丟暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺偨傔偺岺掱昡壙巜昗偵娭偡傞尋媶, 惛枾岺妛夛 愗嶍壛岺愱栧埾堳夛 暯惉27擭搙儚乕僋僔儑僢僾, pp.39-40, (2015-11). |
| 7 |
搰揷捈栱, 拞杮孿堦丟尰暔梈崌宆儅僔儞僔儈儏儗乕僞偺偨傔偺3師尦儌僨儖惗惉偵娭偡傞尋媶, 擔杮婡夿妛夛 2015擭搙擭師戝夛, S1310204, (2015-09). |
| 6 |
揷懞戱嵠, 攏応怲擵桟, 拞杮孿堦, 抾撪朏旤丟儅僀僋儘暋嶨宍忬偺挻惛枾婡忋寁應偵偍偗傞僾儘乕僽巔惃偺寛掕偵娭偡傞尋媶, 2015擭搙惛枾岺妛夛 廐婫戝夛妛弍島墘夛, pp.569-570, (2015-09). |
| 5 |
忋栰丂塴, 拞杮孿堦丟暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉偺偨傔偺壛岺僼傿乕僠儍偺採埬, 2015擭搙惛枾岺妛夛弔婫戝夛妛弍島墘夛, pp.341-342, (2015-03). |
| 4 |
埨摗弫恖, 拞杮孿堦丟恷巁僫僩儕僂儉悈梟塼傪梡偄偨岺嶌暔攃帩庤朄偺奐敪, 擔杮婡夿妛夛 戞10夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.213-214, (2014-11). |
| 3 |
攏応怲擵桟, 拞杮孿堦, 抾撪朏旤丟僙僢僥傿儞僌岆嵎傪曗惓偟偨旕夞揮岺嬶偵傛傞5幉惂屼挻惛枾愗嶍壛岺, 擔杮婡夿妛夛 戞10夞惗嶻壛岺丒岺嶌婡夿晹栧島墘夛, pp.211-212, (2014-11). |
| 2 |
拞杮孿堦丟懡幉丒暋崌壛岺婡梡岺掱愝寁偲岻柇壛岺, 2014擭搙惛枾岺妛夛 弔婫戝夛妛弍島墘夛 僔儞億僕僂儉乽崅晅壛壙抣愗嶍媄弍乿, pp.78-79, (2014-03). |
| 1 |
搨丂恏塻, 拞杮孿堦, 彫敥堦巙, 抾撪朏旤丟恘愭堏摦壛岺朄傪梡偄偨挻惛枾儅僀僋儘嬋柺壛岺, 2012擭搙惛枾岺妛夛廐婫戝夛妛弍島墘夛, pp.823-824,
(2012-09).
|
仴懕偒傪尒傞
仯偨偨傓
| 32 |
媨揷垽搇, 崱嫶惓柧, 埳摗夒晀, 拞杮孿堦丟奼挘尰幚偵傛傞儅僔僯儞僌僙儞僞傊偺儚乕僋偺庢晅偗偺巟墖偵娭偡傞尋媶, 惛枾岺妛夛 戞31夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.137, (2024-03). |
| 31 |
郷拞丂椚, 慮変晹塸夘, 拞杮孿堦丟岺嶌暔嵽椏偵墳偠偰堎側傞岺掱愝寁偺幚尰偵岦偗偨媄擻妉摼偵娭偡傞尋媶, 惛枾岺妛夛 戞31夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.107, (2024-03). |
| 30 |
尨揷岶堦, 摗揷丂徦, 庒搚峩堦, 憹媨懽摽, 拞杮孿堦丟婡夿妛廗傪墖梡偟偨岺掱愝寁偺偨傔偺壛岺帠椺偺偽傜偮偒偺暘愅偵娭偡傞尋媶, 惛枾岺妛夛 戞30夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.11-12, (2023-03). |
| 29 |
憡攏孾桟, 慮変晹塸夘, 拞杮孿堦丟岺嬶宱楬惗惉偺偨傔偺惢昳惢憿忣曬偵傛傞CAD儌僨儖偺廋惓偵娭偡傞尋媶, 惛枾岺妛夛 戞30夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.3-4, (2023-03). |
| 28 |
彫悪棟媣, 拞杮孿堦丟岺嶌婡夿偺慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅偲壛岺帪娫偵傛傞岺掱昡壙偵娭偡傞尋媶, 惛枾岺妛夛 戞29夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.1-2, (2022-03). |
| 27 |
戝抮峢夘, 彫嬍泫暯, 拞杮孿堦丟V峚偺挻惛枾愗嶍壛岺偵傛傞儗乕僓桿婲昞柺廃婜峔憿偺惂屼偵娭偡傞尋媶, 惛枾岺妛夛 戞28夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.30-31, (2021-03). |
| 26 |
徏杮榓恀, 拞杮孿堦丟壛岺昡壙傪斀塮偟偨婡夿妛廗偵婎偯偔嬥宆壛岺偺岺掱忣曬偺悇掕偵娭偡傞尋媶, 惛枾岺妛夛 戞28夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.7-8, (2021-03). |
| 25 |
惣揷峗巌, 埳摗夒晀, 拞杮孿堦丟傾僀僩儔僢僉儞僌偵傛傞婡夿壛岺抜庢傝偺媄擻偺壜帇壔偵娭偡傞尋媶, 惛枾岺妛夛 戞28夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.3-4, (2021-03). |
| 24 |
彫懞彯巎, 拞杮孿堦丟婡夿妛廗傪墖梡偟偨嬥宆壛岺偺岺掱愝寁巟墖僔僗僥儉偺奐敪偵娭偡傞尋媶, 惛枾岺妛夛 戞27夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.15-16, (2020-03). |
| 23 |
搉曈梇搇, 拞杮孿堦丟暋崌壛岺婡偵傛傞晹昳壛岺偺岠棪壔偵岦偗偨岺掱愝寁偵娭偡傞尋媶, 惛枾岺妛夛 戞27夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.11-12, (2020-03). |
| 22 |
媑愳戱柌, 拞杮孿堦丟傾僀僩儔僢僉儞僌傪梡偄偨岺掱愝寁偺媄擻偺壜帇壔偵娭偡傞尋媶, 惛枾岺妛夛 戞27夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.5-6, (2020-03). |
| 21 |
堜尦棟垽, 拞杮孿堦丟僯儏乕儔儖僱僢僩儚乕僋傪墖梡偟偨嬥宆壛岺偺岺嬶悇掕僔僗僥儉偺奐敪, 惛枾岺妛夛 戞26夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.97-98, (2019-03). |
| 20 |
彫徏丂峲, 拞杮孿堦丟僕僌偺惂栺傪斀塮偟偨晹昳壛岺梡岺掱愝寁巟墖僔僗僥儉偺奐敪, 惛枾岺妛夛 戞26夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.59-60, (2019-03). |
| 19 |
孂栰恗巌, 拞杮孿堦丟岺嶌暔偺僩億儘僕乕嵟揔壔傪墖梡偟偨嶌嬈愝寁巟墖庤朄偵娭偡傞尋媶, 惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.125-126, (2018-03). |
| 18 |
惣郪宑桽, 壛摗嫵擵, 鍿丂暥堣, 拞杮孿堦丟Laser R-Test偵傛傞懡幉惂屼岺嶌婡夿偺婔壗岆嵎摨掕偵娭偡傞尋媶, 惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.87-88, (2018-03). |
| 17 |
愥壓樞恀, 拞杮孿堦丟僩億儘僕乕嵟揔壔偵婎偯偔岺嶌暔偺壛岺搑拞宍忬偺寛掕偵娭偡傞尋媶, 惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.63-64, (2018-03). |
| 16 |
嫶杮恀桼, 拞杮孿堦丟僯儏乕儔儖僱僢僩儚乕僋傪梡偄偨暋嶨宍忬嬥宆偺岺掱愝寁巟墖僔僗僥儉偺奐敪, 惛枾岺妛夛 戞25夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.59-60, (2018-03). |
| 15 |
杒愳丂楑, 拞杮孿堦丟嶻嬈梡儘儃僢僩傪梡偄偨挻惛枾壛岺婡傊偺儚乕僋偺庢晅偗偵娭偡傞尋媶, 惛枾岺妛夛 戞24夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.89-90, (2017-03). |
| 14 |
屲廫棐妜巎, 拞杮孿堦丟壛岺僼傿乕僠儍偵婎偯偔暋崌壛岺婡偺嶌嬈愝寁巟墖偵娭偡傞尋媶, 惛枾岺妛夛 戞24夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.29-30, (2017-03). |
| 13 |
忋懞孾屽, 拞杮孿堦丟挻惛枾愗嶍壛岺偵岦偗偨儚乕僋偺宍忬丒埵抲偺婡忋寁應偵娭偡傞尋媶, 惛枾岺妛夛 戞24夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.17-18, (2017-03). |
| 12 |
彫尨寬堦楴, 拞杮孿堦丟岺嬶杸栒傪棙梡偟偨僟僀儎儌儞僪岺嬶偺婡忋惉宍偵娭偡傞婎慴揑専摙, 惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.97-98, (2016-03). |
| 11 |
堜忋桭婱, 拞杮孿堦丟攃帩懼偊偲摨帪壛岺傪峫椂偟偨暋崌壛岺婡梡岺掱愝寁巟墖僔僗僥儉, 惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.69-70, (2016-03). |
| 10 |
挿搰丂怢, 拞杮孿堦丟婡忋寁應傪婎偵偟偨栚昗宍忬偺埵抲丒巔惃寛掕偵傛傞NC僨乕僞偺廋惓, 惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.63-64, (2016-03). |
| 9 |
斅栰寬懢榊, 拞杮孿堦丟僩億儘僕乕嵟揔壔傪梡偄偨壛岺搑拞宍忬偺寛掕庤朄偺採埬, 惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.61-62, (2016-03). |
| 8 |
揷拞彔懢榊, 拞杮孿堦丟挻惛枾愗嶍壛岺偵偍偗傞僙僢僥傿儞僌岆嵎曗惓偺偨傔偺帋偟嶍傝宍忬偺採埬, 惛枾岺妛夛 戞23夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.31-32, (2016-03). |
| 7 |
嶳娸抦婸, 拞杮孿堦丟挻惛枾6幉惂屼愗嶍壛岺偺僙僢僥傿儞僌岆嵎偺曗惓, 惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.115-116, (2015-03). |
| 6 |
揷懞戱嵠, 拞杮孿堦丟儅僀僋儘暋嶨宍忬偺婡忋寁應巟墖僔僗僥儉偺奐敪, 惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.37-38, (2015-03). |
| 5 |
埨摗弫恖, 拞杮孿堦丟廮擃暔丒擄攃帩暔偺壛岺巟墖僔僗僥儉偺奐敪, 惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.35-36, (2015-03). |
| 4 |
堃懞寬懢, 拞杮孿堦丟岺掱愝寁巟墖僔僗僥儉偺岺掱昡壙巜昗偺妋棫, 惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.25-26, (2015-03). |
| 3 |
搰揷捈栱, 拞杮孿堦丟暋崌壛岺婡偺尰暔梈崌儅僔儞僔儈儏儗乕僞偺奐敪, 惛枾岺妛夛 戞22夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.13-14, (2015-03). |
| 2 |
悪嶳堦攏, 拞杮孿堦丟僙僢僥傿儞僌岆嵎曗惓偵傛傞挻惛枾儅僀僋儘暋嶨宍忬壛岺, 惛枾岺妛夛 戞21夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.29-30, (2014-03). |
| 1 |
斞捤桭梞, 拞杮孿堦丟恷巁僫僩儕僂儉悈梟塼偵傛傞岺嶌暔攃帩偺採埬, 惛枾岺妛夛 戞20夞妛惗夛堳懖嬈尋媶敪昞島墘夛, pp.87-88, (2013-03). |
仴懕偒傪尒傞
仯偨偨傓
| 11 |
拞杮孿堦, 屆摽桭恀丟惢昳惢憿忣曬偵婎偯偔婡夿壛岺偺DX偵岦偗偨帺摦岺掱愝寁, 戞20夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.68-69, (2024-11). |
| 10 |
拞杮孿堦, 彫徏丂峲, 彫悪棟媣, 杻惗丂岻丟岺嶌婡夿偺婡庬慖掕偵岦偗偨宍忬憂惉塣摦偵婎偯偔岺掱暘愅, 戞19夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.64-65, (2022-11). |
| 9 |
拞杮孿堦, 孎栰娈恀斂, 孂栰恗巌丟岺嶌暔偺僩億儘僕乕嵟揔壔偵婎偯偔挻暋嶨宍忬壛岺, 戞18夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.108-109, (2018-11). |
| 8 |
拞杮孿堦, 堜忋桭婱, 屲廫棐妜巎丟懡幉丒暋崌壛岺婡偺偨傔偺岺掱愝寁巟墖僔僗僥儉, 戞18夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.106-107, (2018-11). |
| 7 |
拞杮尋媶幒丟師悽戙偺CAM僔僗僥儉偵傛傞暋嶨丒旝嵶3D宍忬偺婡夿壛岺, 搶嫗擾岺戝妛 壢妛攷暔娰婇夋揥 儕傾儖丠僶乕僠儍儖丠枹棃傊旘傃弌偣俁俢, (2018-04). |
| 6 |
拞杮孿堦丟僆儞僨儅儞僪婡夿壛岺傪栚巜偟偨岺掱愝寁巟墖僔僗僥儉偺奐敪, JST 搶嫗擾岺戝妛 怴媄弍愢柧夛, pp.29-33, (2017-06). |
| 5 |
拞杮孿堦, 崅嫶扖屴, 屆屻堯徦丟壛岺搑拞宍忬偺僩億儘僕乕嵟揔壔偵婎偯偔壛岺庤弴寛掕庤朄偺採埬, 戞17夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.110-111, (2016-11). |
| 4 |
拞杮孿堦丟暋嶨丒旝嵶宍忬偺愗嶍壛岺偺巟墖媄弍, 搶嫗擾岺戝妛 嫟摨尋媶僔乕僘愢柧夛2016 婡夿宯丒揹婥揹巕宯, (2016-09). |
| 3 |
拞杮孿堦丟傾僕儍僀儖惗嶻偵岦偗偨懡幉暋崌壛岺婡梡惢憿巟墖僔僗僥儉偺奐敪, JST敪傕偺偯偔傝僔乕僘敪昞夛, pp.7-9, (2016-02). |
| 2 |
拞杮孿堦, 埨摗弫恖, 抾撪朏旤丟恷巁僫僩儕僂儉悈梟塼傪梡偄偨岺嶌暔攃帩庤朄Flexible Clamper偺採埬, 戞16夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞, pp.74-75, (2014-11). |
| 1 |
搨丂恏塻, 拞杮孿堦, 抾撪朏旤丟僟僀儎儌儞僪岺嬶偺杸栒梷惂偵傛傞崅峝搙嵽偺挻惛枾愗嶍壛岺, 戞15夞崙嵺岺嶌婡夿媄弍幰夛媍 億僗僞乕僙僢僔儑儞,
pp.88-89, (2012-11).
|
仴懕偒傪尒傞
仯偨偨傓
| 16 |
拞杮孿堦丟傾僀僩儔僢僉儞僌偵傛傝妉摼偟偨媄擻傪妶梡偟偨岺掱愝寁, 惛枾岺妛夛帍, 89姫, 12崋, pp.885-889, (2023-12). |
| 15 |
拞杮孿堦丟怺憌妛廗偵傛傞嬥宆壛岺偺岺掱愝寁巟墖偵娭偡傞庢慻傒, 擔姧岺嬈怴暦, 宆媄弍, 38姫, 10崋 摿廤乽嬥宆偯偔傝偵栶偵棫偮両戝妛偺媄弍奐敪偲嶻妛楢実乿, pp.70-73, (2023-09). |
| 14 |
拞杮孿堦丟僩億儘僕乕嵟揔壔傪梡偄偰寛掕偟偨壛岺弴彉偵傛傞愗嶍壛岺, 愭抂壛岺婡夿媄弍怳嫽嫤夛, 愭抂壛岺媄弍 119崋, pp.13-15, (2023-02). |
| 13 |
拞杮孿堦丟懡幉丒暋崌壛岺婡偵傛傞岺掱廤栺宆婡夿壛岺偺偨傔偺岺掱愝寁, 擔姧岺嬈怴暦, 婡夿媄弍, 70姫, 11崋 摿廤乽偙偙傑偱偱偒傞両婡夿壛岺尰応偺岺掱廤栺乿, pp.21-24, (2022-10). |
| 12 |
拞杮孿堦丟恖岺抦擻媄弍偵傛傞愗嶍壛岺偺帺摦岺掱愝寁, 惛枾岺妛夛帍, 87姫, 5崋, pp.417-421, (2021-05). |
| 11 |
拞杮孿堦丟旝嵶愗嶍壛岺偺崅岠棪壔偵岦偗偨尋媶奐敪摦岦, 擔姧岺嬈怴暦, 宆媄弍, 34姫, 8崋 摿廤乽嬥宆偺旝嵶壛岺媄弍偲壛岺婡丒岺嬶偺摦岦乿, pp.18-21, (2019-08). |
| 10 |
拞杮孿堦丟岺嶌暔偺僩億儘僕乕嵟揔壔偵傛傞暋嶨宍忬壛岺, 愭抂壛岺婡夿媄弍怳嫽嫤夛, 愭抂壛岺媄弍 108崋, pp.4-6, (2019-07). |
| 9 |
拞杮孿堦丟僆儞僨儅儞僪婡夿壛岺偺幚尰偵岦偗偨岺掱愝寁巟墖僔僗僥儉, 壔妛岺嬈幮, 働儈僇儖丒僄儞僕僯儎儕儞僌, 63姫, 6崋, pp.44-51, (2018-06). |
| 8 |
拞杮孿堦丟懡幉丒暋崌壛岺婡偺偨傔偺岺掱愝寁巟墖僔僗僥儉偺奐敪, 擔姧岺嬈怴暦, 2018擭5寧28擔 摿廤乽MC丒NC岺嶌婡夿乿, pp.16-18, (2018-05). |
| 7 |
拞杮孿堦丟懡幉丒暋崌壛岺婡偺偨傔偺岺掱愝寁巟墖僔僗僥儉偺奐敪, 擔姧岺嬈怴暦, 婡夿媄弍, 66姫, 4崋 摿廤乽岺掱廤栺丒崅岠棪壔傪幚尰偡傞暋崌壛岺婡偲僔儈儏儗乕僔儑儞丒廃曈媄弍乿, pp.24-30, (2018-04). |
| 6 |
拞杮孿堦丟儅僀僋儘暋嶨宍忬偺挻惛枾懡幉惂屼愗嶍壛岺, 梴尗摪, 婡夿偺尋媶, 68姫, 4崋, pp.277-285, (2016-04). |
| 5 |
拞杮孿堦丟暋嶨宍忬憂惉偵岦偗偨廮擃岺嶌暔偺攃帩丒曐帩庤朄, 搖棻壛岺妛夛帍, 60姫, 4崋, pp.194-197, (2016-04). |
| 4 |
拞杮孿堦丟廮擃岺嶌暔偺岻柇壛岺, 愭抂壛岺婡夿媄弍怳嫽嫤夛, 愭抂壛岺媄弍 93崋, pp.7-9, (2014-07). |
| 3 |
拞杮孿堦丟懡幉暋崌壛岺偺岺掱愝寁巟墖偲岻柇壛岺傊偺婜懸, 擔姧岺嬈怴暦, 2014擭5寧29擔 摿廤乽MC丒NC岺嶌婡夿乿, pp.23-25, (2014-05). |
| 2 |
拞杮孿堦丟岺嶌婡夿偺暋崌壔偲岺掱愝寁巟墖偵傛傞CAM僔僗僥儉偺崅搙壔, 擔姧岺嬈怴暦, 2013擭10寧22擔戞2晹 摿廤乽儊僇僩儘僥僢僋僕儍僷儞2013偁偡奐枊乿, pp.10-11, (2013-10). |
| 1 |
拞杮孿堦丟愗嶍壛岺婡夿亅儅僔僯儞僌僙儞僞宯亅, 擔杮岺嬈弌斉, 婡夿偲岺嬶2013擭1寧崋 摿廤乽JIMTOF2012偵傒傞嵟怴媄弍摦岦乿, pp.8-13, (2013-01). |
仴懕偒傪尒傞
仯偨偨傓
| 3 |
拞杮孿堦丟岺嶌婡夿岦偗僜僼僩僂僃傾奐敪偱丄嶻嬈偺婎斦傪嫮壔偡傞, Top Researchers 2018擭1寧2擔崋, 摿廤AI/ICT/Robotics, http://top-researchers.com/?p=1174, (2018-01). |
| 2 |
拞杮孿堦丟婡夿壛岺偺巟墖僔僗僥儉 惢昳傊偺嵟揔宱楬帵偡, 擔宱嶻嬈怴暦 2017擭6寧29擔崋, 師悽戙偺愭摫幰, pp.12, (2017-06). |
| 1 |
拞杮孿堦丟抏惈嵽椏傪掅僐僗僩偱屌掕, 寧姧丒惗嶻嵿儅乕働僥傿儞僌 2014擭4寧崋, 崱偵壴嶇偒幚傪寢傇, pp.A-194, (2014-04). |
仴懕偒傪尒傞
仯偨偨傓
Copyright (c) Nakamoto Laboratory. All Rights Reserved.
|
